What is the Difference Between SFP-10G-SR and SFP-10G-SR-S?
High-speed data transmission is a necessity in today’s world. Whether you’re managing a busy company or watching your favorite shows online, the device that handles all of the data transfers matters. SFP-10G-SR and SFP-10G-SR-S are the two key components for this, but what do these acronyms actually stand for, and how do they differ from one another? Let us understand it in simple terms.
What is SFP-10G-SR?
SFP-10G-SR is an essential device that helps you get high-speed data transmission. So, let’s break it down and understand it better:
- SFP stands for “Small Form-Factor Pluggable.” It is a small but powerful data connector.
- “10G” tells us that it can handle up to 10 gigabits of data per second.
- The “SR” in SFP-10G-SR stands for “Short Range.” This means that this tiny device is best used for sending data at close quarters, usually within the same building or data center.
- SFP-10G-SR is compliant with TAA.
- The SFP-10G-SR can operate in the EXT (Extended temperature range: -5 to 85°C), IND (Industrial temperature range: -40 to 85°C), and STOR temperature ranges (-40 to 85°C).
Simply put, the SFP-10G-SR is a small, fast data connector meant for short-distance data transmission.
What is SFP-10G-SR-S?
Now that we know what SFP-10G-SR stands for and what it does, let’s understand SFP-10G-SR-S.
At first glance, they seem the same, but there’s a subtle difference that may have a major effect.
- SFP-10G-SR-S can also handle 10 gigabits of data per second.
- It is also designed for short-range data transmission.
- However, the “S” in SR-S stands for “Simplified.” This indicates that the main goal of SR-S is to make using and configuring networking hardware simpler.
- The following environments are appropriate for it: non-temperature controlled environments, such as rugged/industrial (RGD), platforms with plugged-in optics that need an extended operating temperature range (EXT), and TAA compliance.
Let’s see how SFP-10G-SR-S is simpler to use and what the difference is between them.
The Difference Between SFP-10G-SR and SFP-10G-SR-S
Installation Using Plug-and-Play:
SFP-10G-SR-S provides easy installation, whereas SFP-10G-SR may need intricate setups and technical expertise.
You can connect SFP-10G-SR-S to your network devices without the need for technical expertise. Due to the simple installation procedure, you can get it up and running quickly, reducing downtime as well as the requirement for a complex network setup.
No Expert Networking Knowledge Needed:
SFP-10G-SR-S does not need a background in networking. SFP-10G-SR, on the other hand, might require a certain amount of technical expertise to configure. SFP-10G-SR-S can thus be put in and used with confidence by people who might not be familiar with all aspects of networking protocols and configurations.
Shorter Setup Time:
SFP-10G-SR-S significantly decreases setup time due to its simplified installation process. There is no need to spend hours changing settings or fixing problems. This is why it is a great option for small businesses, home networks, and other places where a quick and simple installation is needed.
Integration and Compatibility:
SFP-10G-SR-S is compatible with different networking devices, making it easier to connect to modern networks. SFP-10G-SR may need more adjustments for compatibility. This versatility of SFP-10G-SR-S makes sure that you can use it easily with your present network.
Reliable Performance Out of the Box:
As SFP-10G-SR-S is designed to be installed easily, you can expect reliable performance right out of the box, whereas SFP-10G-SR might need some optimizations for optimal performance. If you are someone who values consistency and stability, this reliability will prove beneficial to you.
User-Friendly Design:
The SFP-10G-SR-S has a user-friendly design with clear labeling and simple interfaces. This simplifies the process of finding, establishing a connection with, and managing the transmitter inside your network.
Attractive Prices:
The cost is another difference; the SFP-10G-SR-S is available for a more attractive price. This is because SFP-10G-SR-S does not have as many features as SFP-10G-SR does, but these are the features that are usually not required.
Which One Do You Need?
Now you might be wondering which one you need. Your specific circumstances will determine the answer to this question.
SFP-10G-SR-S is an affordable choice that is intended for data center and enterprise 10G and 40G applications.
If you want a device that is easy to use and simple, the SFP-10G-SR-S is the device for you. There is no need for complex networking knowledge; it is as easy as plugging in a USB drive. It is also a more affordable option, which can be great for you if you are on a budget. This SFP is ideal for people who want things to run smoothly without getting too technical.
SFP-10G-SR requires more expertise, so if you have experts who can configure this device, you can go for it. As SFP-10G-SR is compliant with TAA and can operate in the EXT (Extended temperature range: -5 to 85°C), IND (Industrial temperature range: -40 to 85°C), and STOR temperature ranges (-40 to 85°C), you can use it with systems that require such special features.
So, the choice between SFP-10G-SR and SFP-10G-SR-S completely depends on your particular needs and expertise.
Are you trying to find an online store that can provide you with the SFP-10G-SR-S? Gear Net Technologies has got your back. We have for you this amazing product that can speed up your data transmission. Just contact us on WhatsApp at +971585811786 and let us know what you need.
SFP-10G-SR vs SFP-10G-LRM vs SFP-10G-LR, Which to Choose?
If you talk about the commonly used 10G SFP+ modules used in the fiber optic communicarions, the names would be SFP-10G-SR, SFP-10G-LRM, and SFP-10G-LR. These transceivers are widely manufactured by major companies such as Cisco, Juniper, Arista, and FS, and are primarily used in switches and routers.
An SFP module is a compact, hot-swappable device. The designation “10G” denotes its maximum transmission capacity of 10.3 Gbps, which makes it compatible with 10 Gigabit Ethernet. The acronyms SR, LRM, and LR indicate the transmission range of the 10G optical module, ranging from short to long distances.
The primary focus of this blog post will be the difference between SFP-10G-SR vs SFP-10G-LRM vs SFP-10G-LR. Also, we will discuss which one should you choose.
The 10GBASE-SR SFP+ module, also known as the SFP-10G-SR, utilizes VCSEL technology and is capable of transmitting data up to 300 meters when used with OM3 Multimode Fiber (MMF). The design of these modules is such that they are cost-effective and consume low power.
The SFP-10G-LR module is a 10GBASE-LR SFP+ module that employs Distributed Feedback Laser (DFB) technology. It operates at a nominal wavelength of 1310nm and is capable of transmitting data up to a distance of 10 km over Single Mode Fiber (SMF). These modules are typically used for connecting buildings on a large campus or establishing a Metro Area Network (MAN).
The SFP-10G-LRM module is a 10GBASE-LRM module that can accommodate link distances of up to 220m using standard Fiber Distributed Data Interface (FDDI) grade multimode fiber. To meet the specifications of FDDI-grade, OM1, and OM2 fibers, it is necessary to couple the transmitter through a mode conditioning patch cord. However, for applications over OM3 or OM4, no mode conditioning patch cord is required.
Other differences based on different factors are:
Package type:
All three module types have different package types. Talking about SFP-10G-SR and SFP-10G-LRM, they use an LC duplex interface. On the other hand, SFP-10G-LR works with a single connector.
Transmission rate:
These three module types are suitable for 10-gigabit Ethernet because they have a maximum transmission rate of 10.3Gbps. No other modules have this high transmission rate.
Wavelength:
The wavelength of these module types varies. You cannot use them randomly expecting desired results. The shortest wavelength of 850nm is used by SFP-10G-SR. Next, the longer wavelength of 1310 nm is used by SFP-10G-LRM and the longest wavelength of 1310nm or 1550 is used by SFP-10G-LR. But, the thing is that the wavelength depends on the manufacturer.
Maximum distance:
The maximum distance of these module types varies depending on different parameters. The SFP-10G-SR transmits a maximum distance of up to 300 meters. The SFP-10G-LRM transmits the maximum distance of up to 220 meters. And lastly, the SFP-10G-LR transmits maximum distance up to 10 kilometers, 20 kilometers and more. Even this depends on the manufacturer.
Interface:
Surprisingly, all the SFP module types support LC duplex interfaces. The only difference is that the SFP-10G-LRM comes with a unique capability that supports both single-mode and multi-mode fiber.
Laser type:
The SFP-10G-LRM and SFP-10G-LR use the same laser type, which is a Distribute Feedback (DFB) laser. On the other hand, SFP-10G-SR uses a Vertical-Cavity Surface-Emitting Laser (VCSEL). The laser type used by these modules makes a major difference.
Fiber optic type:
Like laser type, two SPF module types use the same fiber optic type. The two similar ones are SFP-10G-SR and SFP-10G-LRM. They use multi-mode fiber optic cables. Talking about SFP-10G-LR, they use single-mode fiber optic cables.
Transmitted light power:
The light power transmission rate is different for all three SFP modules. The power light transmitted by SFP-10G-SR is between -6 and -1 dBM, SFP-10G-LRM is between -6 and 0 dBm and SFP-10G-LR is between 0 and 4 dBm.
Received sensibility:
The received sensibility of SFP-10G-SR and SFP-10G-LRM is the same, which is -11.1 dbm. Regarding SFP-10G-LR, the received sensibility is high, which is -14.4 dBm.
Commercial temperature
SFP-10G-SR and SFP-10G-LRM operate at a commercial temperature ranging between 0 and 70 degree Celsius. On the other hand, the SFP-10G-LR functions at the range of -40 to 85 degree Celsius, which is a wider commercial temperature.
Application range:
The application range depends on the communication distance. For short-distance communication, SFP-10G-SR is used. For longer distances within a data center, SFP-10G-LRM is used. And lastly, for long-distance communication between data centers or across wide areas, SFP-10G-LR is used. This longest distance is seen in metropolitan and access networks.
What should you choose?
The choice depends on your network requirements. For a short distance transmission distance (up to 300 meters), you should choose SFP-10G-SR. This is an affordable option as well. But, if the transmission distance is longer (up to 200 meters), you should choose SFP-10G-LRM. This distance is relatively short. Regarding SFP-10G-LR, you should choose this if the transmission is longer (up to 10 kilometers) and your budget permits.
Other than this, you should consider the fiber optic cable used in these module types because it plays an important role. SFP-10G-LR supports single-mode fiber but SFP-10G-SR and SFP-10G-LRM support multimode fiber. Also, you should consider the compatibility of the SFP module types with the network equipment. Just keep in mind that all equipment doesn’t support all types of SFP modules. The objective is that your network should run smoothly without any interruption.
To know more about SFP-10G-SR, SFP-10G-LRM, and SFP-10G-LR modules, please connect with us via WhatsApp at +971585811786