Free shipping on all UAE order

All Products
More Categories Close Menu

14 Years Of Experience

  • Gear Net Technologies LLC
  • sira-removebg-preview
sira-removebg-preview

Product Details

Sale!

7600-SIP-400 (USED)

$9,188.00

< tbody >

Model: 7600-SIP-400 Catalyst 6500 Service Module
Detail: Cisco 7600 Series SPA Interface Processor-400
Chat With GNTME LLC

Share this product

Description

7600-SIP-400 Specification

Compatibility

Cisco Route Switch Processor 720 3C/3CXL, Cisco Supervisor Engine 720-3B/3BXL, and Cisco Supervisor Engine 32 (Sup-32) systems

Minimum softwareCompatibility

Cisco IOS® Software Release 12.2(18)SXE, or later releases for Supervisor Engine 720-3B/3BXL and Supervisor Engine 32 systems in native mode Cisco IOS Software; also, 12.2(33)SRB or later releases for RSP720-GE-3CXL and RSP720-GE-3C systems

Protocols

●  TCP

●  User Datagram Protocol (UDP)

●  IPv4 Unicast and Multicast

●  IPv6 Unicast and Multicast

●  Multiprotocol Label Switching (MPLS)

●  SAToP and CESoPSN

Encapsulation

●  Frame Relay

●  Point-to-Point Protocol (PPP)

●  High-Level Data Link Control (HDLC)

●  ATM permanent virtual circuit-constant bit rate (PVC-CBR), variable bit rate real-time (VBR-rt), VBR non-real-time (VBR-nrt), and unspecified bit rate (UBR)

●  ATM switched virtual circuit (SVC)-CBR, VBR-rt, VBR-nrt, UBR, UBR+

●  TDM over MPLS, ATM over MPLS, and ATM over GRE

●  L2TPv3

Cards, ports, and slots

Four SPA bays per Cisco 7600 SIP-400

Features

QoS, ACLs, and Low-Speed Aggregation Features

QoS

●  Modular QoS CLI (MQC)

●  Classification based on:

◦   IP Precedence (IPv6 and IPv4)

◦   Diffserv code point (DSCP) (IPv6 and IPv4)

◦   MPLS experimental values (MPLS EXP)

◦   Extended ACL

◦   ATM CLP

◦   Frame Relay DE

◦   Class of Service (CoS)

◦   VLAN

Congestion Avoidance

●  Weighted Random Early Detection (WRED) based on IP Precedence, DSCP, MPLS EXP, ECN (mark IP TOS field for POS traffic)

Queuing

●  Congestion management

◦   Per-virtual circuit queuing

◦   Ingress and egress Low-Latency Queuing (LLQ)

◦   Egress Class-Based Weighted Fair Queuing (CBWFQ)

Traffic Classification, Shaping, and Bandwidth Policing

●  Marking

●  Policing

●  Distributed traffic shaping (DTS)

●  Hierarchical service policies

Security

●  Standard and extended ACLs

Layer 2 and Layer 3 VPNs

●  Ethernet over MPLS (EoMPLS)

●  ATM over MPLS (ATM over MPLS)

◦   ATM Adaptation Layer 5 (AAL5) virtual circuit mode, single and packed cell relay virtual circuit mode

●  Frame Relay over MPLS (FRoMPLS)

●  Layer 3 MPLS/VPN over GRE

●  ATM over GRE, Ethernet over GRE

●  TDM over MPLS

High availability

●  IPv4 Nonstop Forwarding (NSF)

●  IPv4 Stateful Switchover (SSO)

●  Automatic Protection Switching (APS) with ATM, POS SPAs

●  OIR for both SIP and SPA

Multilink support

●  Frame Relay Multilink^1 (1) Added in >15.2(04)S

Memory

1 GB default Double Data Rate (DDR) synchronous dynamic RAM (SDRAM) per Cisco 7600 SIP-400

Supported SPAs

Following SPAs are supported on SIP-400 release wise

7600-SIP-400 – POS SPAs Support

SPA ID

Project/Family

Height

Min Release

SPA-2XOC3-POS

Sphinx

Half

12.2(18)SXE

SPA-4XOC3-POS

Sphinx

Half

12.2(18)SXE

SPA-1XOC12-POS

Sphinx

Half

12.2(18)SXE

SPA-1XOC48-POS

Iguana

Half

12.2(33)SRA

SPA-4XOC3-POS-V2

Gladiator

Half

15.2(04)S

SPA-8XOC3-POS

Gladiator

Half

15.2(04)S

SPA-2XOC12-POS

Gladiator

Half

15.2(04)S

SPA-4XOC12-POS

Gladiator

Half

15.2(04)S

7600-SIP-400 – ATM SPAs Support

SPA ID

Project/Family

Height

Min Release

SPA-2XOC3-ATM

Warlord

Full

12.2(18)SXE

SPA-4XOC3-ATM

Warlord

Full

12.2(18)SXE

SPA-1XOC12-ATM

Warlord

Full

12.2(18)SXE

SPA-1XOC48-ATM

Ronin

Full

12.2(33)SRA

SPA-3XOC3-ATM-V2

Barbarian

Half

15.0(01)

SPA-1XOC3-ATM-V2

Barbarian

Half

15.0(01)

SPA-1XOC12-ATM-V2

Barbarian

Half

15.0(01)

7600-SIP-400 – GE SPAs Support

SPA ID

Project/Family

Height

Min Release

SPA-2X1GE

Wanda

Half

12.2(18)SXF

SPA-2X1GE-V2

Wanda

Half

12.2(18)SRB

SPA-5X1GE-V2

Cricket

Half

12.2(33)SRB

SPA-1X10GE-V2

Scorpion

Half

12.2(33)SRB

SPA-2X1GE-SYNCE

SyncE

Half

15.0(01)

SPA-4X1FE-TX-V2

FastEthernet

Half

12.2(33)SRD

SPA-8X1FE-TX-V2

FastEthernet

Half

12.2(33)SRD

7600-SIP-400 – CEoP SPAs Support

SPA ID

Project/Family

Height

Min Release

SPA-24XT1E1-CE

Velvet Hammer

Half

12.2(33)SRB

SPA-1XOC3-CE

Black Russian

Half

12.2(33)SRB

SPA-2XT3E3-CE

White Russian

Half

12.2(33)SRC(ATM only)

7600-SIP-400 – Serial/Channelized SPAs

SPA ID

Project/Family

Height

Min Release

SPA-2XT3E3

Javelin

Half

12.2(33)SRC

SPA-4XT3E3

Javelin

Half

12.2(33)SRC

SPA-8XCHTE1

Maverick

Half

12.2(33)SRC

SPA-CHOC3-STM1

Prowler

Half

12.2(33)SRC

SPA-2XCT3

Patriot

Half

12.2(33)SRC

SPA-4XCT3

Patriot

Half

12.2(33)SRC

SPA-4XT-SERIAL

DocOct

Half

15.2(03)S

SPA-CHOC12-STM4

Chopper

Half

12.2(33)SRD

SPA-1XCHOC48/DS3

Trex

Full

15.2(01)S

SPA-2XT3/E3-V2

Javelin-V2

Half

15.3(3)S

SPA-4XT3/E3-V2

Javelin-V2

Half

15.3(3)S

SPA-8XCHT1/E1-V2

Maverick-V2

Half

15.3(3)S

SPA-1XCHSTM1/OC3-V2

Prowler-V2

Half

15.3(3)S

SPA-2XCT3/DS0-V2

Patriot-V2

Half

15.3(3)S

SPA-4XCT3/DS0-V2

Patriot-V2

Half

15.3(3)S

Environmentalconditions

●  Operating temperature: 32 to 104°F (0 to 40°C)

●  Storage temperature: -40 to 167°F (-40 to 75°C)

●  Relative humidity: 10 to 90 percent, noncondensing

●  Operating altitude: -60 to 2000m

MIBs

●  Cisco Entity MIB (CISCO-ENTITY-MIB)

●  Cisco Entity Asset MIB

●  Cisco Entity Field-Replaceable Unit (FRU) Control MIB

●  Cisco Entity Alarm MIB

●  Interface IF MIB (RFC 2233)

●  Frame Relay MIB (RFC 1315)

●  Cisco Frame Relay MIB

●  ATM MIB (RFC 1695)

●  Definitions of Managed Objects for Bridges (RFC 1493)

●  Evolution of Interfaces Group of MIB-II (RFC 1573)

●  SNMP MIB II (RFC 1213)

●  Remote Monitoring (RMON) MIB (RFC 1757)

●  Switch Monitoring (SMON) MIB

Network management

Supported with CiscoWorks CiscoView

CiscoWorks Resource Manager Essentials (RME)

Cisco IP Solution Center (ISC)

Physical specifications

●  Occupies one slot in a Cisco 7600 Series router

●  Supports up to 12 Cisco 7600 SIP-400s in a 13-slot chassis

●  Requires Supervisor Engine 720-3B or 720-3BXL

●  Dimensions (H x W x D): 1.75 x 15.375 x 16 in.

●  Weight: 16 lbs not including the packaging

Power

185W power consumption per Cisco 7600 SIP-400

265W maximum power consumption with 4 SPAs

Indicators

Cisco 7600 SIP-400 status: green (operational); orange (faulty)

Regulatory complianceSafety

CE marking

●  UL 60950

●  CSA C22.2 No. 60950

●  EN60950

●  TS001

●  IEC 60950

●  AS/NZS3260

●  UL60950

EMC

●  FCC Part 15 Class A

●  ICES-003 Class A

●  VCCI Class A

●  EN55022 Class A

●  CISPR22 Class A

●  AS/NZS3548 Class A

●  EN61000-3-2

●  EN61000-3-3

●  EN61000-3-1

●  EN55024

●  EN50082-1

●  EN300 386

Standards

Telecommunications

●  TU-T G.610

●  ITU-T G.703

●  ITU-T G.707

●  ITU-T G.783 Sections 9-10

●  ITU-T G.784

●  ITU-T G.803

●  ITU-T G.813

●  ITU-T G.825

●  ITU-T G.826

●  ITU-T G.841

●  ITU-T G.957 Table 3

●  ITU-T G.958

●  ITU-T I.361

●  ITU-T I.363

●  ITU I.432

●  ITU-T Q.2110

●  ITU-T Q.2130

●  ITU-T Q.2140

●  ITU-T Q.2931

●  ITU-T O.151

●  ITU-T O.171

●  ETSI ETS 300 417-1-1

●  ACA TS 026 (1997)

●  BABT/TC/139 (Draft 1e)

Get a Enquiry