HPE DL380 Gen10 Plus Server vs. DL380 Gen10 Server
Comparison between HPE DL380 Gen10 Plus Server vs. DL380 Gen10 Server:
HPE recently released a new series of ProLiant rack servers, including the DL380 Gen10 plus, DL385 Gen10 plus, and DL360 Gen10 plus. However, what is the distinction between old and plus series?
Let’s compare the HPE DL380 Gen10 Plus and DL380 Gen10 in this post.
The main difference between the HPE ProLiant DL380 Gen10 Plus server and the DL380 Gen10 server is that the HPE ProLiant DL380 Gen10 Plus server is built on 3rd Generation Intel Xeon Scalable Processors. The HPE ProLiant DL380 Gen10 Plus server, which has PCIe Gen4 capabilities, provides faster data transfer rates and networking speeds.
In fact, the appearances of these two series are nearly identical:
HPE ProLiant DL380 Gen10 Plus:
HPE ProLiant DL380 Gen10 :
This table shows the specification of the HPE DL380 Gen10 Plus Server vs. DL380 Gen10 Server.
|Feature||HPE ProLiant DL380 Gen10 Plus Servers||HPE ProLiant DL380 Gen10 Servers|
|Processor||Intel Xeon Scalable Processors, 3rd Generation, with 16 to 40 cores depending on the processor.||1 or 2 Intel Xeon processors from the 3100 / 4100 / 5100 / 6100 / 8100 series, up to 28 cores, PCIe 3.0|
|Memory||HPE DDR4 SmartMemory 8.1 TB RDIMM (4 TB per processor), 11.2 TB LRDIMM, and Intel® OptaneTM Memory (5.6 TB per processor with 8x LRDIMM and 8x 512 GB Intel Optane)||1 to 24 DDR4 DIMMs (up to 12 per processor), 6 channels per CPU, up to 2666 MHz HPE Smart Memory (1.5TB max)|
|Persistent memory||Intel Optane Persistent Memory for HPE||No support for NVDIMMs or persistent memory at initial release|
|HPE Smart drives||8 or 12 LFF SAS/SATA/SSD drives Depending on the configuration, 8, 10, 16, 18, or 24 SFF SAS/SATA/SSD, 2 M.2 SATA SSD are standard on the primary riser. 8 SFF mid-tray optional, 6 SFF rear-drive optional, 4 LFF mid-tray optional, 3 LFF rear-drive optional, and 2 SFF or 2 Dual UFF rear-drive optional, 20 SFF NVMe optional, NVMe support via Express Bay will limit maximum drive capacity, depending on the model.||SATA: SFF dual flash adapter support; 20 NVMe drives supported; 19 LFF/30 SFF;|
|Power||Dual hot-plug redundant 1+1 HPE Flexible Slot Power Supplies (2.6”)||1 or 2 Flex Slot Titanium (96% eff.) FF power supplies; No Gen9 PSU support|
|Security||Optional locking Bezel Kit, Intrusion Detection Kit, and HPE TPM 2.0||Chassis intrusion detection switch / TPM 2.0|