QSFP-100G-PSM4-S=

QSFP-100G-PSM4-S= Specification

Description

100GBASE PSM4 QSFP Transceiver, MPO, 500m over SMF

Dimensions

13.5 x 18.4 x 72.4 mm

 QSFP Port cabling specifications

Nominal Wavelength (nm)

1310

Cable Type

SMF

Core Size (Microns)

G.652

Modal Bandwidth (MHz*km)*¹

Cable Distance

500m

Power Consumption (W)

3.5

Pull Tab Color

Orange

*¹ Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm

Optical characteristics

Transmit Power (dBm) per lane^*2

Max:+2.0

Min:-9.4

Receive Power (dBm) per lane^*2*3

Max:+2.0

Min: -12.66

Receive Power (dBm) per lane

1295 to 1325

^*2 Transmitter and receiver power is average optical power, unless specified

^*3 Optical power at RX is informative only. A received power within this range is required but does not ensure operation

Environmental Conditions and Power Requirements

Commercial temperature

0 to 70°C (32 to 158°F)

Storage temperature

-40 to 85°C (-40 to 185°F)

Regulatory and Standards compliance

Standards

•SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) – Rev 1.8 May 10, 2013

•SFF-8636: Common Management Interface – DRAFT Rev 1.9 May 12, 2014

•802.3™-2012 IEEE Standard for Ethernet

•IEEE 802.3ba Amendment of IEEE Std 802.3-2012

•IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1st August 2014)

•GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable

•GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies

•GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment

•GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors

•RoHS 6

Safety

•Cable jacket of QSFP copper modules is UL E116441 Compliant

•QSFP copper cables are ELV compliant