ASR-9010-AC-V2 specifications

Cisco ASR 9010 Specs

Width: 17.38 in. (441.45 mm)

Depth:

●  With doors: 29.03 in. (737.4 mm)

●  Without doors: 28.24 in. (717.3 mm)

Weight:

●  155.6 lb (70.73 kg) (chassis with PEM)

231.6 lb (105.27 kg) (fully loaded, excluding linecards and power modules) – RSP, two v2 fan trays, PEMs

2 fan trays

2 PEMs (either DC or AC)

1 fan filter

Fan redundancy

Feed redundancy

Power-supply redundancy

RSP redundancy

Software redundancy

21- and 23-in. adapters available

Note: Minimum 17.75-in. opening between posts is needed for proper operation

Note: Doors not recommended in enclosed cabinets

Performance

●  Active/active nonblocking operation mode in dual-RSP redundant configuration

●  Fully redundant in dual-RSP redundant configuration

●  Built-in service-intelligence and traffic-prioritization capability

●  12 high-efficiency fans per tray

●  Variable-speed fans for optimal thermal performance

●  No single point of failure

Multiple power module types:

●  6 kW and 3 kW AC power modules

●  4.4 kW and 2.1 kW DC power modules

Note: Mixing of AC and DC modules is not supported

●  DC: N+1 redundancy

●  Power module redundancy

●  A/B Feed redundancy

●  PEM redundancy

Fully load-sharing power infrastructure

Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum)

Environmental Specifications

ASR 9010: 23 to 122ºF (-5 to 50ºC)

Regulatory Compliance

●  SR-3580: NEBS Criteria Levels (Level 3)

●  GR-1089-CORE: NEBS EMC and Safety

●  GR-63-CORE: NEBS Physical Protection

●  VZ.TPR.9205: Verizon TEEER

●  EN300 386: Telecommunications Network Equipment (EMC)

●  ETSI 300 019 Storage Class 1.1

●  ETSI 300 019 Transportation Class 2.3

●  ETSI 300 019 Stationary Use Class 3.1

●  FCC Class 47CFR15 A

●  ICES 003 Class A

●  AS/NZS CISRP22 Class A

●  CISPR 22 (EN55022) Class A

●  VCCI Class A

●  BSMI Class A

●  IEC/EN 61000-3-12: Power Line Harmonics

●  IEC/EN 61000-3-11: Voltage Fluctuations and Flicker

●  EN55022: Information Technology Equipment (Emissions)

●  EN 50121-4: Railway EMC

●  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)

●  IEC/EN-61000-4-3: Radiated Immunity (10V/m)

●  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)

●  IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)

●  IEC/EN-61000-4-5: Signal Surge Ports (1kV)

●  IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)

●  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)

●  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)

●  IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations

●  EN55024: Information Technology Equipment (Immunity)

●  EN50082-1/EN-61000-6-1: Generic Immunity Standard

●  EN 50121-4: Railway EMC

●  UL/CSA/IEC/EN 60950-1

●  IEC/EN 60825 Laser Safety

●  ACA TS001

●  AS/NZS 60950

●  FDA Code of Federal Regulations Laser Safety