Product Details
JG922A
| Model: | HPE JG922A – Aruba 1920 Switch |
| Detail: | Aruba 1920-8G-PoE+ (180W) Switch |
Description
JG922A Specifications |
|
|
Type |
HPE 1920-8G-PoE+ (180W) Switch |
|
Physical specifications |
|
|
Dimensions |
26 x 30 x 4.36 cm (10.24 x 11.81 x 1.72 in) (1U height) |
|
Weight |
3.2 kg (7.05 lb) |
|
Technical specifications |
|
|
I/O ports and slots |
· 8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at) · 2 SFP 1000 Mb/s ports · Supports a maximum of 8 autosensing 10/100/1000 ports plus 2 1000BASE-X SFP ports, or a combination |
|
Additional ports and slots |
1 RJ-45 console port to access limited CLI port |
|
Memory and processor |
MIPS @ 500 MHz, 32MB flash, 128MB SDRAM; packet buffer size: 4.1Mb |
|
Mounting and enclosure |
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) |
|
Performance |
100Mb latency: < 5 μs 1000Mb latency: < 5 μs Throughput: 14.8 Mp/s (64-byte packets) Routing/switching capacity: 20 Gb/s Routing table size: 32 entries (IPv4), 32 entries (IPv6) MAC address table size: 8192 entries |
|
Reliability |
MTBF (years): 64.51 |
|
Environmental specifications |
|
|
Operating temperature |
0° to 40°C (32° to 104°F) |
|
Operating relative humidity |
10% to 90%, noncondensing |
|
Nonoperating/storage temperature |
-40° to 70°C (-40° to 158°F) |
|
Nonoperating/storage relative humidity |
10% to 95%, noncondensing |
|
Altitude |
Up to 5 km (16,404 ft) |
|
Acoustic |
Low-speed fan: 43.6 dB, High-speed fan: 51.5 dB; ISO 7779 |
|
Electrical specifications |
|
|
Frequency |
50/60 Hz |
|
AC voltage |
100 – 240 V ac |
|
Maximum power rating |
235 W |
|
PoE power |
180 W PoE+ |
|
Notes |
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies. |
|
Safety certifications |
|
|
Safety |
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 |
|
Emissions |
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A |
|
Management |
IMC – Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB |
|
Notes |
SFP port and copper ports work simultaneously, independent of each other, to provide a total of 10 Gigabit switching ports. |
