Huawei OptiXstar P802E Specification |
| NNI | XGS-PON |
| UNI | 4*GE |
| Dimensions (W x D x H) | 160mm x 110mm x 30mm (Without floor mat) |
| Operating temperature | -40°C to +55°C |
| Operating humidity | 5%RH to 95%RH (non-condensing) |
| Power adapter input | 100V to 240V AC, 50/60Hz |
| System power supply | 11V to 14V (typical 12 V), 1A |
| Static power consumption | 4.5 W |
| Maximum power consumption | 6 W |
| Surge protection specifications | GE: common mode 6 kV; differential mode 1.5 kV. AC power: common mode 6kV; differential mode 6 kV |
| Installation mode | Support outdoor network box installation and indoor desktop installation, wall mounting, or network box installation. |
Port Parameters |
| SFP | · Support XGS-PON optical module · Class N1/N2; · Receiver sensitivity: -28dBm; · Overload optical power: -9dBm; · Transmission rate: upstream 9.953 Gbit/s, downstream 9.953 Gbit/s · Type B single-homing · Type B dual-homing (supported in Layer 2 forwarding) |
| GE | · Port type: RJ-45 · Auto ports speed (10/100/1000 Mbit/s) · Auto-MDI/MDIX · Configuration of the number of MAC addresses learned · VLAN transparent transmission/VLAN filtering |
Function List |
| Automatic Service Provisioning | · Authentication exemption · XML/OMCI/TR069 |
| Multicast | · IGMP v2/v3 snooping · Dynamic controllable multicast · IGMP proxy · MLDv1/MLDv2 snooping |
| Smart O&M | · XML/Web UI · Rogue ONT detection and self-regulation · Ring network detection/PPPoE/DHCP simulation testing |
| QoS | · Ethernet port rate limitation · 802.1p priority · SP/WRR/SP+WRR |
| Layer 3 Features | · Default/Static/Policy/Service routes · VLAN binding · ALG/UPnP/ARP · DDNS/DMZ/DNS/NAPT · PPPoE/Static IP/DHCP · Port mapping/Port trigger · IPv6 |
| Layer 2 Management | · DHCP Option82 · PITP · BPDU transparent transmission · LLDP/LLDP-MED |
| Security | · 802.1x · IPv6/IPv4 firewalls · Filtering based on MAC/IP/URL · DoS/ARP anti-attacks · Static MAC address binding · Device access control · Web session number restriction |
