FAP-221E Specification

Hardware

Hardware Type

Indoor AP

Number of Radios

2 + 1 BT/BLE

Number of Antennas

4 Internal + 1 Internal BT/BLE

Antenna Type and Peak Gain

PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz

Frequency Bands (GHz)*

2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725,5.725–5.850

Radio 1 Capabilities

2.4 GHz b/g/n (2×2:2 stream)

20/40 MHz (256 QAM)

Radio 2 Capabilities

5 GHz a/n/ac (2×2:2 stream)

20/40/80 MHz (256 QAM)

Maximum Data Rate

Radio 1: up to 400 Mbps

Radio 2: up to 867 Mbps

Bluetooth Low Energy (BT/BLE) Radio

Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power

Interfaces

1x 10/100/1000 Base-T RJ45

Power over Ethernet (PoE)

IEEE 802.3af 

Simultaneous SSIDs

16 (14 if background scanning enabled)

EAP Type(s)

EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST

User/Device Authentication

WPA™ and WPA2™ with 802.1x or Preshared key, WEP,Web Captive Portal, MAC blacklist & whitelist

Maximum Tx Power

2.4 GHz: 23 dBm / 200 mW (2 chains combined)*

5 GHz: 24 dBm / 251 mW (2 chains combined)*

Kensington Lock

Yes

IEEE Standards

802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X,802.3af, 802.3az

SSID Types Supported

Local-Bridge, Tunnel, Mesh

Per Radio Client Capacity

Up to 512

Cellular Co-existence

Yes

LED Off Mode

Yes

Advanced 802.11 Features

802.11ac MU-MIMO Wave 2

Yes

Transmit Beam Forming (TxBF)

Yes

Low-Density Parity Check (LDPC) Encoding

Yes

Maximum Likelihood Demodulation (MLD)

Yes

Maximum Ratio Combining (MRC)

Yes

A-MPDU and A-MSDU Packet Aggregation

Yes

MIMO Power Save

Yes

Short Guard Interval

Yes

Wireless Monitoring Capabilities

Rogue Scan Radio Modes

Background, Full-time

WIPS / WIDS Radio Modes

Background, Full-time

Packet Sniffer Mode

Yes

Spectrum Analyzer

Yes

Dimensions

Length x Width x Height

6.3 x 6.3 x 1.85 inches(160 x 160 x 47 mm)

Mounting Options

Ceiling, T-Rail, and Wall

Included Accessories

Mount kits for Ceiling, T-Rail, and Wall

Environment

Power Supply

SP-FAP200-PA-XX, GPI-115,or GPI-130

Power Consumption (Max.)

12.36 W

Humidity

5–90% non-condensing

Operating / Storage Temperature

-4–113°F (-20–45°C) /-40–158°F (-40–70°C)

Directives  

Low Voltage Directive • RoHS

UL2043 Plenum Material

Yes

Mean Time Between Failures

>30 Years

IP Rating

Surge Protection Built In

Hit-less PoE Failover

No

Certifications

Wi-Fi Alliance Certified

Yes

DFS

FCC, IC, CE, Japan, Taiwan

Warranty

Limited Lifetime Warranty

Yes

* Frequency selection and power may be restricted to abide by regional regulatory compliance laws.