Product Details
SPA-OC192POS-XFP
Original price was: AED158,125.00.AED54,789.00Current price is: AED54,789.00.
< tbody >
| Model: | SPA-OC192POS-XFP Cisco ASR 9000 Series Shared Port Adapter |
| Detail: | Cisco ASR 9000 Adapter SPA-OC192POS-XFP 1-port OC192/STM64 POS/RPR XFP Optics |
Description
SPA-OC192POS-XFP specifications |
|
| Description | Cisco ASR 9000 Adapter, SPA-OC192POS-XFP, 1-port OC192/STM64 POS/RPR XFP Optics |
| Product Name | Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter with XFP Optics |
| Product compatibility | • Cisco ASR 1000 Series Router
• Cisco ASR 9000 Series Router |
| Port density per SPA | • 1 port
• DPT/RPR configuration – two SPAs are needed to connect to one RPR ring |
| Physical interface | • OC-192c/STM-64c fixed interface or pluggable (XFP) optics module
• Connector: • XFP-LC connector • Long reach (LR)-SC connector • Very short reach (VSR)-Standard media termination point (MTP) (multipath optical [MPO]) multifiber optical connectors • RPR operation requires a mate cable-part number CBL-RPR-OC192-L or CBL-RPR-OC192-S • Visual status indicators (LEDs): • SPA status LED • Per-port LEDs • Carrier and alarm • Active and loopback • Protect • Pass-through |
| Protocols | • High-Level Data Link Control (HDLC), RFC 2615
• Point-to-Point Protocol (PPP), RFC 1662 • Frame Relay, RFC 2427 • IPv4/IPv6 • IEEE 802.17 RPR • IETF 2892-SRP |
| Features and functions | • Synchronization
• Local (internal) or loop timed (recovered from network) • Layer 3 clock accuracy (± 4.6 ppm) over full operating temperature • Pointer activity monitoring • Local (diagnostic) and line (network) loopback • Section data communication channel (SDCC) -platform-dependent feature • Payload mapping • 1 + x^43 self-synchronous scrambler • SONET/SDH compliance • Telcordia (Bellcore) GR-253-CORE (as applicable) • ANSI T1.105, and T1.231 • ITU-T G.707, G.957, and G.825 (as applicable) • Supported SONET/SDH alarm and signal events • Signal failure bit error rate (SF-ber) • Signal degrade bit error rate (SD-ber) • Signal label payload construction (C2) • Path trace byte (J1) • Section • Loss of signal (LOS) • Loss of frame (LOF) • Error counts for B1 • Threshold crossing alarms (TCA) for B1 • Error counts for B2 • Threshold crossing alarms (TCA) for B2 • Line • Line alarm indication signal (LAIS) • Line remote defect indication (LRDI) • Line remote error indication (LREI) • Path • Path alarm indication signal (PAIS) • Path remote defect indication (PRDI) • Path remote error indication (PREI) • Error counts for B3 • TCA for B3 • Loss of pointer (LOP) • Positive stuffing event (PSE) • Negative stuffing event (NSE) • Path unequipped indication signal (PUNEQ) • Path payload mismatch indication signal (PPLM) |
| Network management | • RFC 2558 MIB (SONET/SDH)
• Simple Network Management Protocol (SNMP) |
| Reliability and availability | • Online insertion and removal (OIR)
• Field-replaceable XFP optical modules • 1 + 1 SONET automatic-protection-switching (APS) and SDH linear multiplex-section-protection (MSP) protocols • Single SPA software reset |
| Physical specifications | • Weight: 0.75 lb (0.34 kg)
• Height: 0.8 in. (2.03 cm) (single height – XFP interface) • Height: 1.6 in. (4.06 cm) (double height – VSR, LR fixed optics) • Width: 6.75 in. (17.15 cm) • Depth: 7.28 in. (18.49 cm) |
| Power | 15.5W maximum |
| Environmental specifications | • Operating temperature: 41 to 104°F (5 to 40°C)
• Storage temperature: -38 to 150°F (-40 to 70°C) • Operating humidity: 5 to 85% relative humidity • Storage humidity: 5 to 95% relative humidity |
| Compliance and agency approvals | Safety
• UL 60950 • CSA 22.2-No.60950 • EN60950 • IEC 60950 CB Scheme • ACA TS001 • AS/NZS 3260 • EN60825IEC60825 laser safety (SR, IR-Class 1) (VSR-Class 1M)1 • 21CFR1040-FDA Code of Federal Regulations (USA) laser safety (SR, IR-Class 1) (VSR-Class 1M)1 EMC • FCC Part 15 (CFR 47) • ICES 003 • EN55022 • CISPR 22 • AS/NZ 3548 • VCCI • EN55024 • EN50082-1 • EN61000-6-1 • EN61000-3-2 • EN61000-3-3 Network Equipment Building System (NEBS) This product is designed to meet the following requirements (official qualification may be in progress): • SR-3580-NEBS: Criteria levels (Level 3 compliant) • GR-63-Core-NEBS: Physical protection • GR-1089-Core-NEBS: EMC and safety ETSI • EN300 386/EN300 386-2 Class B • ETS 300 019 Storage Class 1.1 • ETS 300 019 Transportation Class 2.3 • ETS 300 019 Stationary Use Class 3.1 |
