Description

C1000-48FP-4X-L overview

The Cisco Catalyst C1000-48FP-4X-L 48-Port Full PoE+ Switch is a fixed-configuration, managed Layer 2 access switch. It is intended for small businesses, branch offices and distributed enterprise sites that need many powered Gigabit Ethernet connections and four 10G uplinks.

The switch provides 48 x 10/100/1000 RJ45 PoE+ Ethernet ports and 4 x 10G SFP+ uplinks. Its Full PoE+ configuration has a 740W total power budget for connected equipment such as IP cameras, wireless access points and VoIP phones.

Cisco IOS provides command-line configuration and an on-box web management interface. Available network controls include VLANs, Quality of Service, link aggregation, Spanning Tree, access control and port security for managing traffic and access at the network edge.

The fixed 1RU rack-mount format is suited to office racks and replacement projects that do not require a modular switching chassis. GNTME can assist UAE buyers with model selection, power planning, optics and migration requirements.

C1000-48FP-4X-L specifications

For buyers reviewing a Cisco 48 port PoE switch datasheet, these are the defining configuration details for this Cisco Catalyst 1000 model.

Applications and suitable buyers

The C1000-48FP-4X-L is suited to access-layer projects requiring 48 powered Gigabit ports, a substantial PoE allocation and multiple fibre or direct-attach uplinks.

• IP surveillance networks with numerous powered cameras and high endpoint power requirements.
• Business voice and enterprise wireless deployments using PoE+ phones and access points.
• Branch offices and distributed sites requiring local Layer 2 switching with 10G connections to upstream equipment.
• Installed-base expansion, like-for-like replacement and spare-stock planning for Cisco Catalyst 1000 Series environments.

PoE and endpoint planning

Power over Ethernet Plus, or PoE+, carries network connectivity and electrical power over the Ethernet connection. Although this model has 48 PoE+ ports and a 740W budget, buyers should calculate the combined maximum draw of every phone, camera and access point rather than plan only by port count.

Some endpoints consume less power during normal operation but require a higher allowance when starting. The proposed device list should therefore include endpoint quantities, maximum power requirements and a suitable margin before the switch is ordered.

Uplink and optics planning

The four 10G SFP+ interfaces can provide links to distribution switches, servers or another communications room. Optics or direct-attach cables must match the required speed, medium, connector, distance and far-end interface; buyers should also confirm software-release requirements and whether the design uses multimode or single-mode fibre.

Replacement and quotation planning

Catalyst 1000 hardware is requested for expansion, replacement and spare stock, although availability can vary by model and region. For a new standard, compare the required IOS features, uplink speed, PoE budget, support coverage and management method with current Cisco options. Catalyst 1200 or 1300 models may suit cost-sensitive business networks, while Catalyst 9200-family switches may be considered when enterprise policy, stacking or advanced management is required.

For a Dubai or UAE quotation, provide the quantity, delivery location, endpoint and PoE requirements, uplink medium and distance, required optics, rack accessories, power cords, and any configuration, migration or onsite installation needs.

Frequently asked questions

Is the C1000-48FP-4X-L a managed switch?

Yes. It is a managed Cisco Catalyst Layer 2 access switch with Cisco IOS, command-line configuration and on-box web management.

What is the PoE capacity of the C1000-48FP-4X-L?

It has 48 x 10/100/1000 PoE+ Ethernet ports and a total PoE power budget of 740W. The combined maximum draw of all connected endpoints should be checked before ordering.

Which uplinks does the C1000-48FP-4X-L provide?

The switch has four 10G SFP+ uplink ports. Optics or direct-attach cables should be selected according to speed, medium, connector, reach and the far-end interface.

Can the C1000-48FP-4X-L replace an older Catalyst switch?

It can be considered for replacement projects, but suitability depends on port density, PoE load, uplink design, VLAN and security configuration, software features and support requirements.

Can GNTME assist with this switch in the UAE?

Yes. GNTME can assist with sourcing, bill-of-materials validation, optics selection, configuration planning and deployment services in Dubai and across the UAE.

Official manufacturer information: Cisco product page

Last updated: 28 September 2026