AT815SN-POE Specifications |
| Dimensions (H x W x D) | 49 mm x 295 mm x 132 mm |
| Weight | 0.8 kg |
| System memory | 128 MB DDR2 32 MB flash memory |
| Power input | PoE power supply: in compliance with IEEE 802.3af/at |
| Maximum power consumption | 9.5 W NOTE: The actual maximum power consumption depends on local laws and regulations. |
| Operating temperature and altitude | -60 m to +1800 m: -20°C to +55°C 1800 m to 5000 m: Temperature decreases by 1°C every time the altitude increases 300 m. |
| Storage temperature | -40°C to +70°C |
| Operating humidity | 5% to 95% (non-condensing) |
| IP Rating | IP55 |
| Atmospheric pressure | 70 kPa to 106 kPa |
| Antenna type | Built-in antenna Horizontal beamwidth: 60 degrees Vertical beamwidth: 15 degrees |
| Antenna gain | 13 dBi |
| Maximum transmit power | 5G: 26 dBm (combined power) NOTE: The actual transmit power depends on local laws and regulations. You can adjust the transmit power from the maximum transmit power to 1 dBm, with a step of 1 dB. |
| Maximum number of non-overlapping channels | 5 GHz 802.11a 20 MHz: 5 802.11n 20 MHz: 5 NOTE: The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Codes & Channels Compliance. NOTICE: If the AP is delivered to the USA, pay attention to the following on channel and frequency band usage. The country code of the AP is fixed. High power radars working at frequencies in the range of 5.25 GHz to 5.35 GHz, 5.47 GHz to 5.6 GHz, and 5.65 GHz to 5.725 GHz can interfere with or even damage APs working at the same frequency. |
| Channel rate | 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s 802.11n: 300 Mbit/s |
