AC6805

AC6805 Specification

Forwarding Capability

40 Gbit/s

Maximum Number of Managed APs

6K

Maximum Number of Access Users

64K

AP-AC Networking

Layer 2 or Layer 3 networking

Forwarding Modes

Direct forwarding or tunnel forwarding

AC Active/Standby Modes

1+1 HSB or N+1 backup

Radio Protocols

802.11 a/b/g/n/ac/ac Wave 2/ax

Dimensions (H x W x D)

43.6 mm x 442 mm x 440 mm

Interface type

2 x 40G (QSFP+) + 12 x 10GE (SFP+) + 12 x GE

Maximum power consumption

231.7 W

Operating temperature and altitude

-60 m to +1800 m: 0°C to 45°C 1800 m to 5000 m: Temperature decreases by 1°C every time the altitude increases 220 m.

Relative humidity

5% RH to 95% RH, non-condensing

Power module

AC and DC power modules, supporting hot swapping, and hot backup

NOTE:A maximum of two power modules are supported

Number of managed APs

Central APs：768 Common APs and RUs：6K

NOTE:The RUs managed by the WLAN AC do not occupy the WLAN AC’s license resources. However, the total number of managed common APs and RUs cannot exceed the upper limit allowed by the WLAN AC.

Number of access users

64K

NOTE:The maximum number of access users varies depending on the authentication mode.

Number of MAC address entries

100K

Forwarding capability

40Gbit/s

NOTE:Packet length: 1024 bytes

Number of VLANs

4K

Number of routing entries

IPv4: 16K l

IPv6: 4K

Number of ARP entries

100K

Number of multicast forwarding entries

2K

Number of DHCP IP address pools

256 IP address pools, each of which contains a maximum of 64K IP addresses

Number of local accounts

6.4K

Number of ACLs

32K