Product Details
QSFP-100G-ER4L-S=
Original price was: AED74,995.00.AED17,998.00Current price is: AED17,998.00.
| Model: | QSFP-100G-ER4L-S= – Cisco 100 Gigabit Optical Modules |
| Detail: | 100GBASE QSFP Transceiver, 40KM reach over SMF, Duplex LC |
Description
The 100GBASE-ER4 Lite QSFP28 transceiver module is compatible with Cisco QSFP-100G-ER4L-S= (SMF, 1295 ~ 1310nm, LC, 25km, DOM). This 100GBASE-ER4 Lite QSFP28 transceiver is compatible with Cisco network equipment and is equivalent to Cisco QSFP-100G -ER4L-S. It is suitable for long distances and provides a very cost-effective way to use QSFP28 ports to establish 100 Gigabit link connections between devices.
The compatible QSFP-100G-ER4L-S= converts 4 channels of 25 Gb/s electrical data inputs into 4 channels of WDM LAN optical signals, and then multiplexes them into a single channel of 100 Gb/s optical transmission. Use duplex LC connectors to support link lengths of up to 25 kilometers (without FEC) or 32 kilometers (with FEC) through single-mode fiber (SMF) at specified wavelengths between 1295 nm and 1310 nm.
Cisco QSFP-100G-ER4L-S= Similar Items
- QSFP-100G-CWDM4-S=
- QSFP-100G-LR4-S=
- QSFP-100G-PSM4-S=
- QSFP-100G-SM-SR=
- QSFP-100G-SR4-S=
- QSFP-40/100-SRBD=
Cisco QSFP-100G-ER4L-S= Features
- Functionally identical to Cisco QSFP-100G-ER4L-S=
- QSFP28 MSA compliant
- Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA
- Receiver: 4x25Gb/s APD ROSA
- Up to 25km on G.652 SMF without FEC, or 32km with FEC
- Single 3.3V power supply
- Maximum power consumption 5.0W
- Duplex LC optical connector
- Built-in digital diagnostic function
QSFP-100G-ER4L-S= Specification |
|
| Description | Cisco 100GBASE QSFP Transceiver, 40KM reach over SMF, Duplex LC |
| Dimensions | 13.5 x 18.4 x 72.4 mm |
|
QSFP Port cabling specifications |
|
| Nominal Wavelength (nm) | 1295, 1300, 1304, 1309 |
| Cable Type | SMF |
| Core Size (Microns) | G.652 |
| Modal Bandwidth (MHz*km)*1 | |
| Cable Distance | 40km (with host FEC)
30km (without host FEC) |
| Power Consumption (W) | 4.5 |
| Pull Tab Color | Rad |
| *1 Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm | |
|
Optical characteristics |
|
| Product | QSFP-100G-ER4L-S*4 |
| Transmit Power (dBm) per lane*2 | Max:+6.5
Min:-2.5 |
| Receive Power (dBm) per lane*2*3 | Max:-3.5
Min: -20.5*5 (with FEC) -17*5 (without FEC) |
| Receive Power (dBm) per lane | Four lanes: 1295, 1300, 1304, 1309 |
| *2 Transmitter and receiver power is average optical power, unless specified
*3 Optical power at RX is informative only. A received power within this range is required but does not ensure operation *4 Minimum channel insertion loss is 6.4dB for QSFP-100G-ER4L-S *5 V01 of QSFP-100G-ER4L-S allows Tx Power range with +4.5 (Max) to -2.9 (Min) and Rx Power range with -4.9 (Max) to -19.9 (Min) |
|
|
Environmental Conditions and Power Requirements |
|
| Commercial temperature | 0 to 70°C (32 to 158°F) |
| Storage temperature | -40 to 85°C (-40 to 185°F) |
|
Regulatory and Standards compliance |
|
| Standards | •SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) – Rev 1.8 May 10, 2013
•SFF-8636: Common Management Interface – DRAFT Rev 1.9 May 12, 2014 •802.3™-2012 IEEE Standard for Ethernet •IEEE 802.3ba Amendment of IEEE Std 802.3-2012 •IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1st August 2014) •GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable •GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies •GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment •GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors •RoHS 6 |
| Safety | •Cable jacket of QSFP copper modules is UL E116441 Compliant
•QSFP copper cables are ELV compliant |
