LS-S6324-EI

LS-S6324-EI Specifications

Port

24 GE SFP ports or 10GE SFP+ ports

Forwarding performance

358 Mpps

Switching capacity

480 Gbit/s

MAC address table

Supports 128 K MAC address entries.

Supports automatic learning and aging of MAC addresses.

Supports static, dynamic, and blackhole MAC address entries.

Supports packet filtering based on source MAC addresses

VLAN features

Supports up to 4,096 VLANs.

Supports guest VLANs and voice VLANs.

Supports VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports.

Supports 1:1 and N:1 VLAN switching.

Supports basic QinQ and selective QinQ

IPv4 routing

Supports static routing, RIP v1, RIP v2, ECMP, and URPF.

Supports OSPF, IS-IS, and BGP.

Supports VRRP.

Supports policy-based routing.

Supports routing policies.

IPv6 routing

Supports static routing.

Supports RIPng.

Supports manual tunnels.

Supports 6-to-4 tunnels.

Supports ISTAP tunnels.

Supports OSPFv3

QoS/ACL

Supports rate limit on packets sent and received by a port.

Supports packet redirection.

Supports port-based traffic policing and two-rate three-color CAR.

Supports eight queues on each port.

Supports multiple queue scheduling algorithms including WRR, DRR, SP, WRR+SP, and DRR+SP.

Supports WRED.

Supports re-marking of the 802.1p priority and DSCP priority.

Supports packet filtering based on Layer 2 to Layer 4 information, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol, and VLAN ID.

Supports queue-based rate limit and traffic shaping on ports.

IPv6 features

Supports Neighbor Discovery (ND).

Supports PMTU.

Supports IPv6 Ping, IPv6 Tracert, and IPv6 Telnet.

Supports 6-to-4 tunnels, ISATAP tunnels, and manually configured tunnels.

Supports ACLs based on the source IPv6 address, destination IPv6 address, Layer-4 port, or protocol type.

Supports MLD v1/v2 snooping.

Multicast

Supports static Layer-2 multicast MAC addresses.

Supports MAC-based multicast forwarding.

Supports IGMP snooping and fast leave.

Supports multicast VLAN.

Supports MLD snooping.

Supports IGMP proxy.

Supports controllable multicast.

Supports port-based multicast traffic statistics.

Supports IGMP v1/v2/v3.

Supports PIM-SM, PIM-DM, and PIM-SSM.

Supports MSDP.

Security

Supports hierarchical user management and password protection.

Supports DoS attack defense, ARP attack defense, and ICMP attack defense.

Supports binding of the IP address, MAC address, port number, and VLAN ID.

Supports port isolation, port security, and sticky MAC.

Supports blackhole MAC addresses.

Supports limit on the number of MAC addresses to be learned.

Supports IEEE 802.1x authentication and the limit on the maximum number of users on a port.

Supports multiple authentication methods including AAA, RADIUS, HWTACACS, and NAC.

Supports SSH v2.

Supports HTTPS.

Supports CPU protection.

Supports blacklisting and whitelisting.

Management and maintenance

Supports intelligent stacking (implemented by service ports).

Supports MAC Forced Forwarding (MFF).

Supports Virtual Cable Test (VCT).

Supports Ethernet OAM (IEEE 802.3ah and 802.1ag).

Supports local port mirroring, Remote Switched Port Analyzer (RSPAN), and packet forwarding on an observing port.

Supports remote configuration and maintenance by using Telnet.

Supports SNMP v1/v2/v3.

Supports RMON.

Supports the Network Management System (NMS) and Web management.

Supports HGMP.

Supports system logs and multi-level alarms.

Supports GVRP.

Supports MUX VLAN.

Supports 802.3az (Energy Efficient Ethernet).

Operating environment

Operating temperature: 0°C to 45°C (long term); –5°C to 50°C (short term); relative humidity: 10% to 90% (non-condensing)

Input voltage

AC:

Rated voltage: 100 V to 240 V, 50/60 Hz

Maximum voltage: 90 V to 264 V, 50/60 Hz

Dimensions: width x depth x height

442 mm x 420 mm x 43.6 mm

Power consumption

165 W