Huawei OptiX OSN 550

0 out of 5

< tbody >

Model: Huawei OptiX OSN 550 – Huawei OptiX OSN 550
Detail: Huawei OptiX OSN 550, a dual-domain (time division multiplexing [TDM] and packet domains) device

Description

Huawei OptiX OSN 550 Specification

Dimensions 88mm (H) x 442mm (W) x 220mm (D)
Installation method In a cabinet (including ETSI, 19-inch and 23-inch cabinets), in an outdoor cabinet
Switch capacity Packet: 64 Gbit/s ,TDM: 20 Gbit/s (higher order)
Service slots 8 slots
Supported interfaces Ethernet interface FE/GE/10GE
SDH interface   STM-1/4/16
PDH interface E1/E3; T1/T3
CES interface ATM/IMA E1, ch STM-1
PCM interface FXS/FXO, 2/4 wire audio and E&M

X.21/V.35/V.11/V.24/V.28, RS232/RS422, RS449/RS423A/RS422A, RS530/RS530A, RS485,

G.703 64 kbit/s bidirectional; IEEE C37.94

WDM interface 40 DWDM wavelengths, compliant with ITU-T G.694.1

8 CWDM wavelengths, compliant with ITU-T G.694.2

Networking Mode Supports pure packet, hybrid (packet + SDH), or SDH networking

Supports WDM networking

Power Supply -48 V DC/-60 V DC

220 V AC/110 V AC

Operation Environment Temperature Long term: -5ºC ~ 55ºC

Short term: -5ºC ~ 65ºC

Relative Humidity Long term: 5% ~ 85%

Short term: 5% ~ 95%

Ethernet Feature E-Line ,E-LAN and QinQ

MPLS-TP based VPWS and VPLS

MS-PW

ETH PWE3

IGMP Snooping v2

Blacklist, Broadcast packet suppression, ACL

PCM features Supports 64Kbps timeslot cross-connecting

Voice or data conference, Point-to-Point,Point-to-Multipoint,Multipoint-to-Multipoint

FXO/FXS mode can be set by software

E&M signaling can be set by software (types I, II, III, IV, V and British Telecom SSDC5)

QoS

 

Hierarchical QoS scheduling and traffic shaping

DiffServ mode based on traffic classification

Simple traffic classification, complex traffic classification, per hop behavior (PHB), and ACL

Committed access rate (CAR)

PQ scheduling priority, weighted round robin (WRR) and PQ+WRR queuing

Tail drop and weighted random early detection (WRED)

Shaping based on port scheduling priority

OAM MPLS-TP OAM

 

 

CC, LB, LT

AIS, RDI

LM, DM

LCK, TST

CSF

 

Ethernet OAM

ETH-CC, ETH-Loopback, ETH-Link Trace, Remote Loopback, Remote Fault Detection, RMON(RFC 2819)
Protection Equipment-level Protection Universal Cross Connection, System Control and Clock Processing Board 1+1 backup and power 1+1 backup
MPLS-TP based networklevel Protection

 

LSP/PW Linear protection, Ring protection

Anti multifailure protection based on MS-PW

LAG, MC-LAG, Dual-homing protection, LPT

ERPS,ML-PPP, MSTP

SDH-/PDH-based service protection Linear MSP and MSP ring

SNCP

E1 1+1 SNCP

E1/T1 1+1 tributary protection switch (TPS)

Synchronization

 

Supports G.813, Synchronous Ethernet, and IEEE 1588v2 synchronization

Adaptive clock recovery (ACR)

Two external clock inputs/outputs (2 MHz or 2 Mbit/s)

Two external time signals inputs/outputs (1pps+TOD)

Related Products