Product Details
Huawei OptiX OSN 500
< tbody >
| Model: | Huawei OptiX OSN 500 – Huawei OptiX OSN 500 |
| Detail: | The OptiX OSN 500 is of a pure packet architecture, and supports a variety of service access modes. It completes Huawei’s optical transmission system, and sharpens the competitive edges of Huawei’s optical transmission products. |
Description
Huawei OptiX OSN 500 Specification |
||
| Dimensions | 44mm (H) x 442mm (W) x 220mm (D) | |
| Switch capacity | Packet: 7.2 Gbit/s and TDM: 21.25 Gbit/s (higher order), 5 Gbit/s (lower order) | |
| Service slots | 3 slots | |
| Supported interfaces | Ethernet interface | FE/GE |
| SDH interface | STM-1/4 | |
| PDH interface | E1/E3; T1/T3 | |
| CES interface | ATM/IMA E1, ch STM-1 | |
| Networking Mode | Supporting pure packet or SDH networking
Supporting single-fiber bidirectional transmission |
|
| Power Supply | P48V DC/ -60V DC, 220V AC/110V AC | |
| Operation Environment | Temperature
|
Long term: -5ºC ~ 45ºC
Short term: -5ºC ~ 55ºC |
| Relative Humidity | Long term: 5% ~ 85%
Short term: 5% ~ 95% |
|
| Ethernet Feature | E-Line, E-LAN and QinQ
MPLS-TP based VPWS and VPLS MS-PW ETH PWE3 IGMP Snooping v2 Blacklist, Broadcast packet suppression, ACL |
|
| QoS | Hierarchical QoS scheduling and traffic shaping
DiffServ mode based on traffic classification Simple traffic classification, complex traffic classification, per hop behavior (PHB), and ACL Committed access rate (CAR) PQ scheduling priority, weighted round robin (WRR) and PQ+WRR queuing Tail drop and weighted random early detection (WRED) Shaping based on port scheduling priority |
|
| OAM | MPLS-TP OAM | LSP/PW OAM:
CC, LB, LT AIS, RDI LM, DM LCK, TST CSF |
| Ethernet OAM | ETH-CC, ETH-Loopback, ETH-Link Trace, Remote Loopback, Remote Fault Detection, RMON(RFC 2819) | |
| Protection | Equipment-level Protection | power 1+1 backup |
| MPLS-TP based networklevel Protection | LSP/PW Linear protection, Ring protection
Anti multifailure protection based on MS-PW LAG, MC-LAG, Dual-homing protection, LPT ERPS, MSTP |
|
| SDH based network-level Protection | 2 fiber MS-SP Ring
1+1/1:n (n<=5) Linear MSP,SNCP LAG, LPT, LCAS |
|
| Synchronization | Both Ethernet and SDH networks supporting clock synchronization
Supporting G.813, Synchronous Ethernet and IEEE 1588v2 synchronization Adaptive clock recovery (ACR) One external clock inputs/outputs (2 MHz or 2 Mbit/s) Two external time signals(1pps+TOD) |
|
