7600 SIP-200 Specification |
Compatibility | Cisco 7600 Series SUP32-3B, SUP720-3B, SUP720-3BXL, RSP720-3C, RSP720-3CXL, RSP720-3C-10G, and RSP720-3CXL-10G systems |
Minimum Software Compatibility | Cisco IOS® Software Release 12.2(18)SXE, or later |
Protocols | ● TCP ● User Datagram Protocol (UDP) ● IPv4 Unicast and Multicast ● IPv6 Unicast and Multicast ● MPLS |
Encapsulation | ● Frame Relay ● Multilink Frame Relay – FRF.16 ● PPP ● MLPPP ● Bridge Control Protocol (BCP) ● High-Level Data Link Control (HDLC) ● ATM permanent virtual circuit (PVC)-constant bit rate (CBR), variable bit rate real-time (VBR-rt), VBR non-real-time (VBR-nrt), and unspecified bit rate (UBR) ● ATM switched virtual circuit (SVC)-CBR, VBR-rt, VBR-nrt, UBR, and UBR+ ● POS |
Cards, Ports, and Slots | Four SPA bays per Cisco 7600 SIP-200. The SIP-200 supports oversubscription. |
QoS, Access Control Lists (ACLs), and Low-Speed Aggregation Features |
QoS | ● Modular QoS CLI (MQC) ● Classification ◦ ACLs ◦ IP Precedence ◦ IPv4 and IPv6 ◦ Differentiated services code point (DSCP) ◦ MPLS experimental values (MPLS EXP) ◦ Frame Relay Discard Eligibility ◦ ATM cell loss priority (CLP) ● QoS mappings – CLP, DE to IP type of service (ToS), MPLS EXP; and conversely ● Hierarchical QoS |
Queuing | ● Per-virtual circuit queuing ● Low-latency queuing (LLQ) ● Weighted Fair Queuing (WFQ) ● Class-Based Weighted Fair Queuing (CBWFQ) |
Congestion Avoidance | Weighted Random Early Detection (WRED) |
Traffic Marking, Shaping, and Bandwidth Policing | ● Marking – IP Precedence, DSCP, MPLS EXP, ATM CLP, and FR DE ● Policing ● Distributed traffic shaping (DTS) ● Hierarchical traffic shaping ● Distributed network-based application recognition (NBAR) |
Fragmentation | ● Distributed link fragmentation and interleaving (dLFI) ● Frame Relay Forum FRF.12 |
ACLs and Security | ● Standard, extended, dynamic, reflexive, and time-based ACLs ● Classification based on packet length |
Bandwidth Efficiency | ● cRTP ● ATM permanent-virtual-circuit (PVC) bundles ● Frame Relay virtual circuit bundles |
Layer 2 Bridging and Interworking | ● RFCs 1483 and RFC 2684 ATM Virtual Circuits – Routed and Bridged ● RFC 1490 Frame Relay Virtual Circiuts – Routed and Bridged ● Multipoint Bridging for RFC 1483 virtual circuits ● Multipoint Bridging for RFC 1490 virtual circuits ● Bridge Control Protocol ● Bridging of routed encapsulation ● Routed bridged encapsulation |
Layer 2 and Layer 3 VPNs | ● RFC 2547 MPLS VPNs ● Ethernet over MPLS (EoMPLS) ● ATM over MPLS (ATMoMPLS) ● ATM Adaptation Layer 5 (AAL5) virtual circuit mode, single-cell relay virtual circuit mode ● Frame Relay over MPLS (FRoMPLS) ● PPP over MPLS (PPPoMPLS) ● HDLC over MPLS (HDLCoMPLS) ● Virtual circuit-to-virtual circuit local switching – Frame Relay, ATM – AAL0, AAL5 |
High Availability | ● Nonstop forwarding (NSF) ● Stateful switchover (SSO) ● Automatic Protection Switching (APS) with ATM, POS SPAs ● OIR |
Memory | ● 512-MB default Double Data Rate (DDR) synchronous dynamic RAM (SDRAM) ● Optionally upgradable to 1-GB DDR SDRAM memory |
Supported SPAs | ATM ● Cisco 2-Port OC-3c/STM-1c ATM Shared Port Adapter ● Cisco 4-Port OC-3c/STM-1c ATM Shared Port Adapter POS/Channelized ● Cisco 2-Port OC-3c/STM-1c POS Shared Port Adapter ● Cisco 4-Port OC-3c/STM-1c POS Shared Port Adapter ● Cisco 1-Port Channelized OC-3c/STM-1c POS Shared Port Adapter Copper/Channelized ● Cisco 8-Port Channelized T1/E1 Shared Port Adapter ● Cisco 2-Port Clear Channel T3/E3 Shared Port Adapter ● Cisco 4-Port Clear Channel T3/E3 Shared Port Adapter ● Cisco 2-Port Channelized T3 (DS0) Shared Port Adapter ● Cisco 4-Port Channelized T3 (DS0) Shared Port Adapter ● Cisco 4-Port Serial Shared Port Adapter Fast Ethernet ● Cisco 4-Port Fast Ethernet Shared Port Adapter ● Cisco 8-Port Fast Ethernet Shared Port Adapter |
Environmental Conditions | ● Operating temperature: 32 to 104°F (0 to 40°C) ● Storage temperature: –40 to 167°F (–20 to 70°C) ● Relative humidity: 10 to 90%, noncondensing ● Operating altitude: –60 to 2000m |
MIBs | ● Cisco Entity MIB (CISCO-ENTITY-MIB) ● Cisco Entity Asset MIB ● CISCO-ENTITY-VENDOR-OIDTYPE-MIB OID ● Cisco Entity Field-Replaceable Unit (FRU) Control MIB ● CISCO-ENHANCED-MEMPOOL-MIB ● CISCO-PROCESS-MIB ● CISCO-ENVMON-MIB ● Cisco Entity Alarm MIB ● Simple Network Management Protocol (SNMP) MIB II (RFC 1213) ● Remote Monitoring (RMON) MIB (RFC 1757) |
Network Management | ● Supported with CiscoWorks CiscoView ● CiscoWorks Resource Manager Essentials (RME) ● Cisco IP Solution Center (ISC) |
Physical Specifications | ● Occupies one slot in a Cisco 7600 Series Router ● Supports up to 12 Cisco 7600 SIP-200s in a 13-slot chassis ● Requires Supervisor Engine SUP32-3B, SUP720-3B, SUP720-3BXL, RSP720-3C, RSP720-3CXL, RSP720-3C-10G, or RSP720-3CXL-10G ● Dimensions (H x W x D): 1.74 x 15.3 x 17 in. ● Weight: 8.5 lb |
Power | ● 160W power consumption per Cisco 7600 SIP-200 ● 240W maximum power consumption with Cisco 7600 SIP-200 and 4 SPAs |
Indicators | Cisco 7600 SIP-200 status: ● green (operational) ● orange (faulty) |
Regulatory Compliance | CE marking |
Safety | ● UL 60950 ● CSA C22.2 No. 60950 ● EN60950 ● TS001 ● IEC 60950 ● AS/NZS3260 |
EMC | ● FCC Part 15 Class A ● ICES-003 Class A ● VCCI Class A ● EN55022 Class A ● EN55024 ● EN50082-1 ● CISPR22 Class A ● ETS-300 386 |
Telecommunications Standards | ● ITU-T G.610 ● ITU-T G.703 ● ITU-T G.707 ● ITU-T G.783 Sections 9-10 ● ITU-T G.784 ● ITU-T G.803 ● ITU-T G.813 ● ITU-T G.825 ● ITU-T G.826 ● ITU-T G.841 ● ITU-T G.957 Table 3 ● ITU-T G.958 ● ITU-T I.361 ● ITU-T I.363 ● ITU I.432 ● ITU-T Q.2110 ● ITU-T Q.2130 ● ITU-T Q.2140 ● ITU-T O.151 ● ITU-T O.171 ● ETSI ETS 300 417-1-1 ● ACA TS 026 (1997) ● BABT/TC/139 (Draft 1e) |
