Product Details
RV345-K9-NA
| Model: | RV345-K9-NA – Cisco RV300 VPN Routers |
| Detail: | Cisco RV345 Dual WAN Gigabit VPN Router |
Description
RV345-K9-NA Specification |
|
|
WAN ports |
2 RJ-45 Gigabit Ethernet |
|
LAN ports
|
16 RJ-45 Gigabit Ethernet (LAN 1, 2, 3, 4 and LAN 9, 10, 11, 12 are PoE 802.3at, max 30W per port up to 120W total) |
|
Console/serial |
1 RJ-45 port for future use. Port is disabled |
|
USB
|
2 for external 3G/4G modem or flash drive (USB-3, USB-2) |
|
Firewall
|
Stateful packet inspection, up to 980 Mbps throughput for TCP and UDP |
|
Quality of Service (QoS)
|
Traffic Classes, WAN Queuing, WAN Policing, WAN Bandwidth Management, Assign detailed QoS (Class of Service (CoS)/Differentiated Services Code Point (DSCP)/policies) settings per application or end device |
|
Web Security
|
Dynamic web filtering: Cloud based, more than 80 categories, more than 450 million domains classified |
|
Application Visibility
|
Application identification: Assign policies to Internet applications 500 unique Apps |
|
Client Identification
|
Identifies and categorizes clients dynamically. Assigns policies based on end device category and operating system. |
|
Intrusion Prevention System
|
IDS/IPS inspects network packets, logs and/or blocks a wide range of network attacks. It delivers increased network availability, faster remediation, and comprehensive threat protection. HTTP/FTP/SMTP/POP3/IMAP |
|
Antivirus
|
Protection from viruses, trojans, spyware, and identity theft by inspecting traffic going through the router. HTTP/FTP/SMTP/POP3/IMAP |
|
Cisco Umbrella
|
First line of defense for threats on the Internet. Prevention for user and malware-initiated connections. Protection against Malware, C2 callbacks, and phishing. Proxy inspection for risky domains. |
|
IPSec
|
IKEv1 and IKEv2 50 simultaneous connections (any combination of remote access and site-to-site), up to 650 Mbps throughput |
|
IPsec remote access
|
Yes (remote access from any standards-based IPsec client and Cisco IPsec VPN EasyVPN) |
|
Layer 2 Tunneling Protocol (L2TP) over IPsec |
Yes |
|
Generic Routing Encapsulation (GRE) over IPsec |
Yes |
|
Cisco SSL VPN (Cisco AnyConnect)
|
Maximum 50 SSL VPN tunnels and up to 33Mbps throughput. Also requires Cisco AnyConnect end user licenses to use on the end device. Ideal for mobile devices. |
|
Point-to-Point Tunneling Protocol (PPTP) |
25 connections, up to 100 Mbps throughput |
|
Teleworker mode (Cisco IPsec VPN)
|
Router acts as a client to connect to central VPN gateway in teleworker mode |
|
VPN pass-through |
IPSec, PPTP, L2TP |
|
Management protocols
|
Web browser (HTTP/HTTPS) Simple Network Management Protocol (SNMP) v1, v2c, and v3 Representational State Transfer (REST) API NETCONF |
|
Management Platform |
FindIT Network Manager |
|
Firmware upgrade options
|
Via local PC, USB stick, or from Cisco.com via web browser. Unattended automatic firmware upgrade. |
|
LAN |
|
|
VLAN |
Up to 32 VLANs |
|
Port Security |
Yes, 802.1X |
|
Link aggregation |
Yes (static, no LACP) |
|
IPv6 |
Dual stack, 6rd, 6in4, Dual stack lite |
|
WAN
|
DHCP client, static IP, PPPoE, PPPTP, L2TP, transparent bridge |
|
Routing
|
Static routing, IGMP proxy, Inter-VLAN routing, Routing Information Protocol RIPv1,v2, RIPng |
|
Network Address Translation (NAT)
|
Port Forwarding Port Address Translation (PAT) One-to-one NAT VPN NAT traversal Session Initiation Protocol (SIP) Application-Level Gateway (ALG), FTP ALG |
|
NAT max sessions |
>40000 |
|
NAT max connections per second |
3000 |
|
DynDNS
|
ChangeIP.com, DynDNS.com, No-IP.com, dnsomatic |
|
IPv6 transition |
Dual Stack |
|
Hardware DMZ
|
Yes (when enabled, one LAN port will be DMZ port) |
|
DMZ host |
Yes |
|
System |
|
|
CPU
|
ARM-based architecture, dual core, hardware flow engine 900 Mhz |
|
RAM |
1 GB DDR3 |
|
Flash |
256 MB |
|
Product Dimensions |
|
|
RV340 excluding antennas |
280 x 44 x 170 mm (11 x 1.75 x 6.75 in) |
|
MTBF |
50000 hours |
|
Rack mountable |
Yes |
|
Included accessories
|
Power supply, power cord, Ethernet cable, rack mount kit |
|
Fan |
No |
|
Included accessories |
Power supply, power cord, ethernet cable |
|
Power Supply |
AC 100-240V/1A DC 12V/2.5A DC |
|
Certification
|
FCC Class A CE Class B, UL, cUL, CB, CCC, BSMI, KC, Anatel |
|
Operating temperature |
0° to 40 °C (32° to 104 °F) |
|
Storage temperature |
0° to 70 °C (32° to 158 °F) |
|
Operating humidity |
10% to 85% noncondensing |
|
Storage humidity |
5% to 90% noncondensing |
