Product Details
QSFP-100G-LR4-S=
Original price was: AED32,986.00.AED6,628.00Current price is: AED6,628.00.
< tbody >
| Model: | QSFP-100G-LR4-S= – Cisco 100 Gigabit Optical Modules |
| Detail: | 100GBASE LR4 QSFP Transceiver, LC, 10km over SMF |
Description
Cisco QSFP-100G-LR4-S= Compatible 100GBASE-LR4 QSFP28 Optical Transceiver (SMF, 1295~1310nm, LC, 10km, DOM)
This 100GBASE-LR4= QSFP28 transceiver is compatible with Cisco networking equipment and equivalent to Cisco QSFP-100G-LR4-S=. It is suitable for long distances and offers a highly cost-effective way to establish a 100 Gigabit link connectivity between devices using QSFP28 ports. The compatible QSFP-100G-LR4-S= converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. The transceiver supports link lengths of up to 10km over single-mode fiber (SMF) at the wavelength specified between 1295nm and 1310nm using a duplex LC connector.
QSFP-100G-LR4-S= Similar Items
- QSFP-100G-CWDM4-S=
- QSFP-100G-ER4L-S=
- QSFP-100G-PSM4-S=
- QSFP-100G-SM-SR=
- QSFP-100G-SR4-S=
- QSFP-40/100-SRBD=
QSFP-100G-LR4-S= Features
- Functionally identical to Cisco QSFP-100G-LR4-S=
- Up to 26Gb/s data rate per channel
- QSFP28 MSA compliant
- Up to 10km on single mode Fiber
- Single 3.3V power supply
- Maximum power consumption 3.5W
- Duplex LC optical connector
- Built-in digital diagnostic function
QSFP-100G-LR4-S= Specification |
|
| Description | 100GBASE LR4 QSFP Transceiver, LC, 10km over SMF |
| Dimensions | 13.5 x 18.4 x 72.4 mm |
|
QSFP Port cabling specifications |
|
| Nominal Wavelength (nm) | 1295, 1300, 1304, 1309 |
| Cable Type | SMF |
| Core Size (Microns) | G.652 |
| Modal Bandwidth (MHz*km)*1 | |
| Cable Distance | 10km |
| Power Consumption (W) | 4.0 |
| Pull Tab Color | Blue |
| *1 Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm | |
|
Optical characteristics |
|
| Transmit Power (dBm) per lane*2 | Max:+4.5
Min:-4.3 |
| Receive Power (dBm) per lane*2*3 | Max:+4.5
Min: -10.6 |
| Receive Power (dBm) per lane | Four lanes: 1295, 1300, 1304, 1309 |
| *2 Transmitter and receiver power is average optical power, unless specified
*3 Optical power at RX is informative only. A received power within this range is required but does not ensure operation |
|
|
Environmental Conditions and Power Requirements |
|
| Commercial temperature | 0 to 70°C (32 to 158°F) |
| Storage temperature | -40 to 85°C (-40 to 185°F) |
|
Regulatory and Standards compliance |
|
| Standards | •SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) – Rev 1.8 May 10, 2013
•SFF-8636: Common Management Interface – DRAFT Rev 1.9 May 12, 2014 •802.3™-2012 IEEE Standard for Ethernet •IEEE 802.3ba Amendment of IEEE Std 802.3-2012 •IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1st August 2014) •GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable •GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies •GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment •GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors •RoHS 6 |
| Safety | •Cable jacket of QSFP copper modules is UL E116441 Compliant
•QSFP copper cables are ELV compliant |
