C9117AXI-S Datasheet
$1,695.00
< tbody >
Model: | C9117AXI-S Datasheet – Cisco Catalyst 9100 Series Wi-Fi 6 Access Points |
Detail: | Cisco Catalyst 9117 Series Access Point |
PDF Attachment: c9115axi-s-datasheet
- Description
Description
C9117AXI-S Datasheet – Cisco Catalyst 9100 Series Wi-Fi 6 Access Points
C9117AXI-S Datasheet Specification |
|
Description | Cisco Catalyst 9117AX Access Point, Internal antenna; Wi-Fi 6; 8×8:8 MIMO, S Domain |
Software | ● Cisco Unified Wireless Network Software Release 8.9 or later
● Cisco IOS ® XE Software Release 16.11 or later |
Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers
● Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller |
802.11n version 2.0 (and related) capabilities | ● 8×8 MIMO with four spatial streams for 5-GHz band
● 4×4 MIMO with four spatial streams for 2.4-GHz band ● Maximal Ratio Combining (MRC) ● 20- and 40-MHz channels ● PHY data rates up to 600 Mbps (40 MHz with 5 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● Cyclic Shift Diversity (CSD) support |
802.11ac | ● 8×8 downlink MU-MIMO with eight spatial streams
● MRC ● 802.11ac beamforming ● 20-, 40-, 80, and 160-MHz channels ● PHY data rates up to 3.5 Gbps at 5 GHz ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● CSD support |
802.11ax | ● 8×8 MIMO with eight spatial streams for 5-GHz band
● 4×4 MIMO with four spatial streams for 2.4-GHz band ● Downlink OFDMA ● TWT ● MRC ● 802.11ax beamforming ● 20-, 40-, 80, and 160-MHz channels ● PHY data rates up to 5 Gbps at 5 GHz ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● CSD support |
Integrated antenna | ● 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth |
Interfaces | ● 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
● Management console port (RJ-45) ● USB 2.0 with up to 3.75W (enabled via future software) |
Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
Dimensions (W x L x H) | ● Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)
● Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm) |
Weight | ● 3.02 lb (1.4 kg) |
Input power requirements | ● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)
● Cisco power injector, AIR-PWRINJ6= ● 802.3af PoE ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2×2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off. |
Environmental | ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft. ● Operating temperature: 32° to 122°F (0° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft. |
System memory | ● 2048 MB DRAM
● 1024 MB flash |
DFS | ● 802.11 dynamic frequency selection (DFS) |
Warranty | Limited lifetime hardware warranty |
Available transmit power settings | 2.4 GHz
● 23 dBm (200 mW) ● 20 dBm (100 mW) ● 17 dBm (50 mW) ● 14 dBm (25 mW) ● 11 dBm (12.5 mW) ● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW) ● 2 dBm (1.56 mW) ● -1 dBm (0.78 mW) ● -4 dBm (0.4 mW) ● -6 dBm (0.25 mW) 5 GHz ● 26 dBm (400 mW) ● 23 dBm (200 mW) ● 20 dBm (100 mW) ● 17 dBm (50 mW) ● 14 dBm (25 mW) ● 11 dBm (12.5 mW) ● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW) ● 2 dBm (1.56 mW) ● -1 dBm (0.78 mW) ● -4 dBm (0.4 mW) |
Frequency band and 20-MHz operating channels | S (S regulatory domain):
● 2.412 to 2.472 GHz; 13 channels |