S5700-28P-LI-24S-BAT
$1,370.00
Model: | S5700-28P-LI-24S-BAT Huawei S5700 Series Switch |
Detail: | S5700-28P-LI-24S-BAT(28 Gig SFP,4 of which are dual-purpose 10/100/1000 or SFP,1 battery slot,AC 110/220V) |
- Description
- Reviews (0)
Description
S5700-28P-LI-24S-BAT Specification |
|
Fixed port |
28 x GE SFP ports, 4 x Combo 10/100/1,000 Base-T Ethernet ports |
MAC address table |
IEEE 802.1d compliance |
MAC address learning and aging |
|
Static, dynamic, and blackhole MAC address entries |
|
Packet filtering based on source MAC addresses |
|
MAC address entries: S5700-HI series: S5700-HI: 32K, S5710-HI: 456K, S5720-HI: 128K |
|
VLAN |
4K VLANs |
Guest VLAN and voice VLAN |
|
GVRP |
|
MUX VLAN |
|
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports |
|
1:1 and N:1 VLAN Mapping |
|
SuperVLAN(supported by the S5700-SI/S5700-EI/S5700-HI series) |
|
Ring protection |
RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover |
|
SEP |
|
ERPS(G.8032)(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series) |
|
STP, RSTP, and MSTP |
|
BPDU protection, root protection, and loop protection |
|
BPDU Tunnel |
|
Reliability |
Ethernet OAM (IEEE 802.3ah and 802.1ag) |
ITU-Y.1731 |
|
DLDP |
|
LACP |
|
E-Trunk(supported by the S5700-SI/S5700-EI/S5700-HI series) |
|
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM (supported by the S5700-EI/S5700-HI series) |
|
MPLS features |
MPLS L3VPN |
MPLS L2VPN(VPWS/VPLS) |
|
MPLS-TE |
|
MPLS QoS |
|
Notes: supported by S5710-EI, S5700-HI and S5710-HI |
|
IP routing |
Static routing |
RIPv1, RIPv2 and RIPng,ECMP(supported by the S5700-SI/S5700-EI/S5700-HI series) |
|
OSPF, OSPFv3, IS-IS, IS-ISv6, BGP and BGP4+ (supported by the S5700-EI/S5700-HI series) |
|
IPv6 features |
Neighbor Discovery (ND) |
Path MTU (PMTU) |
|
IPv6 ping, IPv6 tracert, and IPv6 Telnet |
|
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
|
MLD v1/v2 snooping |
|
6to4 tunnel, ISATAP tunnel, and manually configured tunnel(supported by the S5700-SI/S5700-EI/S5700-HI series) |
|
Multicast |
IGMP v1/v2/v3 snooping and IGMP fast leave |
Multicast forwarding in a VLAN and multicast replication between VLANs |
|
Multicast load balancing among member ports of a trunk |
|
Controllable multicast |
|
Port-based multicast traffic statistics |
|
IGMP v1/v2/v3, PIM-SM, PIM-DM, PIM-SSM, MSDP (supported by the S5700-EI/S5700-HI series) |
|
QoS/ACL |
Rate limiting on packets sent and received by an interface |
Packet redirection |
|
Port-based traffic policing and two-rate three-color CAR |
|
Eight queues on each port |
|
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms |
|
WRED (supported by the S5710-EI and S5700-HI) |
|
Re-marking of the 802.1p priority and DSCP priority |
|
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID |
|
Rate limiting in each queue and traffic shaping on ports |
|
Security |
User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense |
|
Binding of the IP address, MAC address, interface, and VLAN |
|
Port isolation, port security, and sticky MAC |
|
MFF |
|
Blackhole MAC address entries |
|
Limit on the number of learned MAC addresses |
|
802.1x authentication and limit on the number of users on an interface |
|
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC |
|
SSH v2.0 |
|
Hypertext Transfer Protocol Secure (HTTPS) |
|
CPU defense |
|
Blacklist and whitelist |
|
Access Security |
DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security |
Management and maintenance |
Virtual cable test |
Port mirroring and RSPAN (remote port mirroring) |
|
Remote configuration and maintenance using Telnet |
|
SNMP v1/v2c/v3 |
|
RMON |
|
Web NMS |
|
HGMP |
|
System logs and alarms of different levels |
|
802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI) |
|
Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI(except battery LAN switches) |
|
NetStream (supported by the S5710-EI, S5700-HI and S5710-HI) |
|
sFlow(supported by the S5700(S)-LI/S5700-EI/S5700-HI series) |
|
Interoperability |
Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) |
|
Supports VCMP (Similar to VTP) |
|
Operating environment |
Operating temperature: 0℃–50℃ |
Relative humidity: 10%–90% (non-condensing) |
|
Input voltage |
AC: |
Rated voltage range: 100 V to 240 V AC, 50/60 Hz |
|
Maximum voltage range: 90 V to 264 V AC, 47/63 Hz |
|
DC: |
|
Rated voltage range: –48 V to –60 V, DC |
|
Maximum voltage range: –36 V to –72 V DC |
|
Note: PoE-support switches do not use DC power supplies. |
|
Dimensions (W x D x H) |
44.2 cm x 31 cm x 4.36 cm |
Power Consumption |
S5700-28P-LI-24S-BAT<34.1W |
Reviews
There are no reviews yet.