S2710-52P-PWR-SI Specification |
Downlink ports | 48 × 10/100Base-TX Ethernet PoE ports |
Uplink ports | 4 × Gigabit SFP |
MAC address | 8K MAC address entries Manual deletion of dynamic MAC address entries Aging time of MAC address configurable Blackhole MAC address entries |
VLAN feature | 4K VLANs, complying with IEEE 802.1Q Port-based VLAN assignment |
N/A |
QoS | Outbound-Port-based rate limiting and flow-based rate limiting 4 or 8 queues of different priorities on each port Mapping between 802.1p priorities and queues SP, WRR, and SP+WRR algorithms |
N/A |
IPv6 feature | IPv6 protocol
Static IPv6 routes |
Multicast | IGMP v1/v2/v3 snooping
Port-based rate limiting for multicast packets |
Reliability | STP (IEEE
802.1d), RSTP (IEEE
802.1w), MSTP (IEEE
802.1s) |
Traffic sampling | N/A |
Security & access features | Storm suppression , IP Source Guard |
Multiple authentication methods including AAA, RADIUS, and TACACS+;
Port isolation;
Suppression of multicast, broadcast, and unknown unicast packets;
CPU defense;
DHCP snooping |
Surge protection | Surge protection capability of service ports: 6 kV (The surge protection capability of service ports on PoE switches is 1 kV.) |
Management | Stack
Auto-Config
CLI-based configuration
Remote configuration using Telnet
SNMP V1/V2/V3
Remote network monitoring
SSHv2
Web-based device management |
Operating environment | Long-term operating temperature: –5°C to + 50°C
Relative humidity: 10% to 90% (non-condensing) |
Power | AC:
Rated voltage range: 100 V to 240 V AC, 50/60 Hz
Maximum voltage: 90 to 264 V AC, 50/60 Hz |
Dimensions (W x D x H) | 442 × 220 × 43.6 mm |
Weight | S2710-52P-SI<3 kg |
