Product Details
NM-8CE1T1-PRI
Original price was: $11,600.00.$4,420.00Current price is: $4,420.00.
| Model: | NM-8CE1T1-PRI Cisco Router Network Module |
| Detail: | 8 port channelized T1/E1 and PRI network module Cisco Router Network Module |
Description
NM-8CE1T1-PRI Specification |
|
|
Product Nunber |
NM-8CE1T1-PRI |
|
Product Description |
8 Port Channelized T1/E1 and ISDN PRI Network Module |
|
Diagnostic Loopback Support |
• E1 loopback modes: • Controller local loopback • Interface local loopback • T1 loopback modes: • Interface local loopback • Interface remote loopback • Controller local loopback • Controller remote loopback • CSU loopback modes for T1 CSU: • Data terminal equipment (DTE) loopback • Network loopback • Payload loopback |
|
Alarm Detection |
• Yellow Alarm-Receive/Send from/to network • Blue Alarm-Receive alarm indication signal (AIS) from network • Red Alarm-Loss of network signal |
|
Relevant MIB Support |
• T1 MIB (RFC1406-MIB) • Cisco Integrated DSU/CSU MIB (CISCO-ICSUDSU-MIB) |
|
Remote Management |
• Cisco CNS 2100 Series Intelligence Engine (IE2100) • CiscoWorks |
|
Signaling Debugging |
• ISDN Q.921 and Q.931 decode • All other previously existing applicable Cisco IOS Software debugs |
|
Dimensions (H x W x D) |
1.59 x 7.10 x 7.29 in. (4.0 x 18.0 x 18.5 cm) |
|
Weight |
• HWIC-1CE1T1-PRI: 0.18 lb (0.08 kg) • HWIC-2CE1T1-PRI: 0.19 lb (0.09 kg) • NM-8CE1T1-PRI: 1.4 lb (0.63 kg) |
|
Operating Temperature |
• 32 to 104°F (0 to 40°C) |
|
Nonoperating Temperature |
• -40 to 158° F (-40 to 70°C) |
|
Relative Humidity |
• 5-95% noncondensing |
|
LEDs |
LEDs per port • Carrier Detect/Loopback (CD/LP): • Off = No carrier detect • Green On = Carrier detect • Yellow On = Port in loopback mode • Alarm (AL): • Off = No alarms • Yellow On = Port in alarm mode LEDs per module (on NM-8CE1T1-PRI only): • EN: • Off = Card not available • On = Card enabled |
|
Ports |
• 1, 2, or 8 T1/E1 ports on RJ-48C connectors |
|
Line Bit Rate (per Port) |
• E1: (2.048 Mbps) • T1: (1.544 Mbps) |
|
Line Coding |
• E1: High-density bipolar three (HDB3) • T1: Alternate mark inversion (AMI) and binary 8-zero substitution (B8ZS) |
|
Framing Formats |
• E1: CRC4 • T1: Super Frame (SF) and Extended Super Frame (ESF) |
|
Output Levels |
• E1: short-haul/long-haul • T1 (line build-out [LBO]): 0, -7.5, or -15 dB |
