JG927A

0 out of 5

$558.00

< tbody >

Model: JG927A – HP 1920 Switch
Detail: HP 1920-48G Switch
Enquire Now

Description

JG927A Specifications

Type HPE 1920-48G Switch
Physical specifications
Dimensions 44 x 23.8 x 4.4 cm (17.32 x 9.37 x 1.73 in) (1U height)
Weight 3.15 kg (6.94 lb)
Technical specifications
I/O ports and slots
  • · 48 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
  • · 4 SFP 1000 Mb/s ports
  • · Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a combination
Additional ports and slots 1 RJ-45 console port to access limited CLI port
Memory and processor MIPS @ 650 MHz, 32MB flash, 128MB SDRAM; packet buffer size: 12Mb
Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance 100Mb latency: < 5 μs

1000Mb latency: < 5 μs

Throughput: 77.4 Mp/s (64-byte packets)

Routing/switching capacity: 104 Gb/s

Routing table size: 32 entries (IPv4), 32 entries (IPv6)

MAC address table size: 16384 entries

Reliability MTBF (years) : 76.92
Environmental specifications
Operating temperature 0° to 40°C (32° to 104°F)
Operating relative humidity 10% to 90%, noncondensing
Nonoperating/storage temperature -40° to 70°C (-40° to 158°F)
Nonoperating/storage relative humidity 10% to 95%, noncondensing
Altitude
Acoustic Pressure: 49.7 dB; ISO 7779
Electrical specifications
Frequency 50/60 Hz
AC voltage 100 – 240 V ac
Maximum power rating 32 W
Notes Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS). When supplemented with the use of an HPE RPS1600 Redundant Power System, up to 795 W of PoE+ can be supplied. Unit max. power consumption with RPS is 833 W.

Safety certifications
Safety UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Emissions FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A
Management IMC – Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB
Notes SFP ports and copper ports work simultaneously, independent of each other, to provide a total of 52 Gigabit Ethernet-capable ports.

Related Products