|
4-port Cisco EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC with power daughter card
|
|
Manufacturer
|
Cisco
|
|
Part Number
|
HWIC-4ESW-POE
|
|
Device Type
|
Expansion module
|
|
Form factor
|
Plug-in module
|
|
Interfaces/Ports
|
4 x RJ-45 10/100Base-TX Auto-sensing/Auto-negotiating/Auto MDI/MDI-X
|
|
Connectivity Media
|
Category 3 UTP 10Base-T
Category 4 UTP 10Base-T
Category 5 UTP 10/100Base-TX
|
|
Data Transfer Rate
|
10 Mbps Ethernet Half/Full-duplex
100 Mbps Fast Ethernet Half/Full-duplex
|
|
I/O Expansions
|
|
Power Daughter Cards
|
4-port inline power module (ILPM-4=)
|
|
The 4- and 9-port Cisco EtherSwitch HWICs (part numbers HWIC-4ESW and HWIC-D-9ESW) are managed 10/100BASE-T Layer 2 switches in a HWIC form factor for the Cisco Integrated Services Routers. The 4-port HWIC comes in a single-wide form factor, and the 9-port HWIC in a double-wide form factor. The switch supports the IEEE 802.1D Spanning Tree Protocol and can be used to connect up to 4 or 9 LANs with up to 15 IEEE 802.1Q-based VLANs (802.1Q). Note: Both HWICs-the 4- and 9-port HWICs-support up to 15 VLANs. They also can be optionally configured to provide 4 or 8 ports of inline power for 802.3af- or Cisco PoE-capable devices. The PoE support is not available on the Cisco 1841 router.
|
|
Specifications
|
|
Target Applications
|
Data, voice, and video
|
|
Supported Router Platforms
|
Cisco 1800 (modular), Cisco 2800, and Cisco 3800 series integrated services routers, Cisco 1841 (supports HWIC-4ESW only; no PoE support), Cisco 2801, Cisco 2811, Cisco 2821, Cisco 2851, Cisco 3825, Cisco 3845, Cisco 1941, Cisco 2901, Cisco 2911, Cisco 2921, Cisco 2951, Cisco 3925, Cisco 3945
|
|
Form Factor
|
HWIC-4ESW = Single-wide HWIC form factor
|
|
Dimensions (W x D x H)
|
HWIC-4ESW = 3.08 x 4.74 x 0.76 in.
|
|
Weight
|
HWIC-4ESW-POE = 108 grams (0.24 lb)
|
|
Standards
|
|
IEEE Protocols
|
Ethernet: IEEE 802.3, 10BASE-T
Fast Ethernet: IEEE 802.3u, 100BASE-TX
IEEE 802.1d Spanning Tree Protocol
IEEE 802.1p CoS for Traffic Prioritization
IEEE 802.1q VLAN
IEEE 802.1x Security
IEEE 802.3x Full Duplex
IEEE 802.3af Power over Ethernet Standard
|
|
RFC
|
RFC 2284, PPP Extensible Authentication Protocol (EAP)
|
|
Manageability
|
SNMP and Telnet interface support delivers comprehensive in-band management, and a CLI management console provides detailed out-of-band management
RMON, SPAN, TFTP, NTP
|
|
Environmental
|
|
Operating Temperature
|
32 to 104°F (0 to 40°C)
|
|
Operating Humidity
|
10 to 85% noncondensing operating
|
Reviews
There are no reviews yet.