FAP-423E
< tbody >
| Model: | FAP-423E – Fortinet FortiAP Access Points |
| Detail: | Indoor wireless AP: Dual radio, External antenna, 2 x GE RJ45 port |
- Description
Description
FAP-423E Specification |
|
|
Hardware |
|
| Hardware Type | Indoor AP |
| Number of Radios | 2 |
| Number of Antennas | 8 External (RP-SMA) |
| Antenna Type and Peak Gain | Dipole: 3 dBi for 2.4 GHz,3 dBi for 5 GHz |
| Frequency Bands (GHz)* | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
| Radio 1 Capabilities | 2.4 GHz b/g/n (4×4:4 stream) 20/40 MHz (256 QAM) |
| Radio 2 Capabilities | 5 GHz a/n/ac (4×4:4 stream) 20/40/80 MHz (256 QAM) |
| Maximum Data Rate | Radio 1: up to 800 Mbps
Radio 2: up to 1,733 Mbps |
| Bluetooth Low Energy (BT/BLE) Radio | |
| Interfaces | 2x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port |
| Power over Ethernet (PoE) | Dual redundant PoE power ports with support for IEEE 802.3at (2×2 operation with 802.3af) |
| Simultaneous SSIDs | Up to 16 (14 if background scanning enabled) |
| EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
| User/Device Authentication | WPA™ and WPA2™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
| Maximum Tx Power | 2.4 GHz: 24 dBm / 251 mW (4 chains combined)*
5 GHz: 25 dBm / 316 mW (4 chains combined)* |
| Kensington Lock | Yes |
| IEEE Standards | 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az |
| SSID Types Supported | Local-Bridge, Tunnel, Mesh |
| Per Radio Client Capacity | Up to 512 |
| Cellular Co-existence | No |
| LED Off Mode | Yes |
|
Advanced 802.11 Features |
|
| 802.11ac MU-MIMO Wave 2 | Yes |
| Transmit Beam Forming (TxBF) | Yes |
| Low-Density Parity Check (LDPC) Encoding | Yes |
| Maximum Likelihood Demodulation (MLD) | Yes |
| Maximum Ratio Combining (MRC) | Yes |
| A-MPDU and A-MSDU Packet Aggregation | Yes |
| MIMO Power Save | Yes |
| Short Guard Interval | Yes |
|
Wireless Monitoring Capabilities |
|
| Rogue Scan Radio Modes | Background, Full-time |
| WIPS / WIDS Radio Modes | Background, Full-time |
| Packet Sniffer Mode | Yes |
| Spectrum Analyzer | Yes |
|
Dimensions |
|
| Length x Width x Height | 8.5 x 8.5 x 2.2 inches (215 x 215 x 56 mm) |
| Mounting Options | Ceiling, T-Rail, and Wall |
| Included Accessories | Mount kits for Ceiling, T-Rail, and Wall |
|
Environment |
|
| Power Supply | SP-FAP400-PA-XX, GPI-115, or GPI-130 |
| Power Consumption (Max.) | 23 W max power draw in 802.3at mode and 12.95 W max power draw when in 802.3af power mode (operates in 2×2 mode) |
| Humidity | 5–90% non-condensing |
| Operating / Storage Temperature | -4–122°F (-20–50°C) / -40–158°F (-40–70°C) |
| Directives | Low Voltage Directive • RoHS |
| UL2043 Plenum Material | Yes |
| Mean Time Between Failures | >30 Years |
| IP Rating | |
| Surge Protection Built In | |
| Hit-less PoE Failover | Yes |
|
Certifications |
|
| Wi-Fi Alliance Certified | Yes |
| DFS | FCC, IC, CE, Japan, Taiwan, Korea |
|
Warranty |
|
| Limited Lifetime Warranty | Yes |
| *Frequency selection and power may be restricted to abide by regional regulatory compliance laws. | |
