Product Details
CE6850-48S4Q-EI-B
AED10,303.00
Model: | Huawei CE6850-48S4Q-EI Switch (48-Port 10G SFP+,4-Port 40G QSFP+,2*FAN Box,Port-side Intaket,Without Power Module) |
Description
CE6850-48S4Q-EI-B Specifications |
|
10G Base-T Ports |
0 |
SFP+ Ports |
48 |
FC Ports |
0 |
QSFP+ Ports |
4 |
Switching Capacity |
1.28 Tbit/s |
Forwarding Rate |
960 Mpps |
Airflow Design |
Front-to-back or back-to-front |
Device Virtualization |
iStack |
Super Virtual Fabric (SVF) |
|
Network Virtualization |
M-LAG |
TRILL |
|
BGP-EVPN (CE6800HI) |
|
VM Awareness |
Agile Controller |
Network Convergence |
FCoE |
DCBX, PFC, and ETS |
|
Programmability |
OpenFlow |
OPS |
|
Puppet, and OVSDB plugins released on open source websites |
|
Linux container for open source and customization programming |
|
Traffic Analysis |
NetStream |
sFlow |
|
VLAN |
Adding access, trunk, and hybrid interfaces to VLANs |
Default VLAN |
|
QinQ |
|
MUX VLAN |
|
GVRP |
|
ACL |
Ingress: 2,250 Egress: 1,000 |
MAC Address Table |
Maximum: 128k |
Dynamic learning and aging of MAC addresses |
|
Static, dynamic, and blackhole MAC address entries |
|
Packet filtering based on source MAC addresses |
|
MAC address limiting based on ports and VLANs |
|
ARP (maximum) |
16k |
IPv4 FIB (maximum) |
16k |
IP Routing |
IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ |
|
IPv6 FIB (maximum) |
8k |
IPv6 |
IPv6 Neighbor Discovery (ND) |
Path MTU Discovery (PMTU) |
|
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 |
|
Multicast FIB (maximum) |
4k |
Multicast |
IGMP, PIM-SM, PIM-DM, MSDP, and MBGP |
IGMP snooping |
|
IGMP proxy |
|
Fast leave of multicast member interfaces |
|
Multicast traffic suppression |
|
Multicast VLAN |
|
MPLS |
MPLS (CE6800HI) |
Reliability |
LACP |
STP, RSTP, VBST, and MSTP |
|
BPDU protection, root protection, and loop protection |
|
Smart Link and multi-instance |
|
DLDP |
|
ERPS (G.8032) |
|
VRRP, VRRP load balancing, and BFD for VRRP |
|
BFD for BGP/IS-IS/OSPF/Static route |
|
QoS |
Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
Actions of ACL, CAR, re-marking, and scheduling |
|
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR |
|
Congestion avoidance mechanisms, including WRED and tail drop |
|
Traffic shaping |
|
Configuration and Maintenance |
Console, Telnet, and SSH terminals |
Network management protocols, such as SNMPv1/v2c/v3 |
|
File upload and download through FTP and TFTP |
|
BootROM upgrade and remote upgrade |
|
802.3az Energy Efficient Ethernet (EEE) |
|
Hot patches |
|
User operation logs |
|
ZTP |
|
Security and Management |
802.1x authentication |
Command line authority control based on user levels, preventing unauthorized users from using commands |
|
DoS, ARP, and ICMP attack defenses |
|
Port isolation, port security, and sticky MAC |
|
Binding of the IP address, MAC address, interface number, and VLAN ID |
|
Authentication methods, including AAA, RADIUS, and HWTACACS |
|
Remote Network Monitoring (RMON) |
|
Dimensions (W x D x H) |
442 mm x 600 mm x 43.6 mm |
Weight (fully loaded) |
11 kg (24.2 lb) |
Environmental Parameters |
Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) |
Operating Voltage |
AC: 90V to 290V |
Max. Power Consumption |
272W |