CE5850-HI-B00
0 out of 5
< tbody >
Model: | CE5850-HI-B00 Huawei CE5800 Series Data Center Switch |
Detail: | CE5850-48T4S2Q-HI Switch(2*150W AC Power Module,2*FAN Box,Port side exhaust) |
Categories: CE5800 Series, Huawei Data Center Switches, Huawei Switches
- Description
Description
CE5850-HI-B00 Specification |
|
Base-T Ports | 48 |
SFP+ Ports | 4 |
QSFP+ Ports | 2 |
Switching Capacity | 336 Gbit/s |
Forwarding Rates | 252 Mpps |
Airflow Design | Front-to-back or back-to-front |
Device Virtualization | iStack |
Super Virtual Fabric (SVF) | |
Network Virtualization | M-LAG |
TRILL (CE5855 & CE5850) | |
VM Awareness | Agile Controller |
SDN | Open Programmability System (OPS) |
Traffic Analysis | NetStream |
sFlow | |
VLAN | Adding access, trunk, and hybrid interfaces to VLANs |
Default VLAN | |
QinQ | |
MUX VLAN | |
GVRP | |
ACL | ingress: 2.25k egress: 1k |
MAC Address Table | maximum: 128k |
Dynamic learning and aging of MAC addresses | |
Static, dynamic, and black hole MAC address entries | |
Packet filtering based on source MAC addresses | |
MAC address limiting based on ports and VLANs | |
ARP (maximum) | 16k |
IPv4 FIB (maximum) | 16k |
IP Routing | IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ (not supported by CE5855) | |
IPv6 FIB (maximum) | 8k |
IPv6 | IPv6 Neighbor Discovery (ND) (not supported by CE5855) |
Path MTU Discovery (PMTU) (not supported by CE5855) | |
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 | |
Multicast FIB (maximum) | 4k |
Multicast | IGMP, PIM-SM, PIM-DM, MSDP, and MBGP |
IGMP snooping | |
IGMP proxy | |
Fast leave of multicast member interfaces | |
Multicast traffic suppression | |
Multicast VLAN | |
Reliability | LACP |
STP, RSTP, VBST, MSTP | |
BPDU protection, root protection, and loop protection | |
Smart Link and multi-instance | |
DLDP | |
ERPS (G.8032) | |
VRRP, VRRP load balancing, and BFD for VRRP | |
BFD for BGP/IS-IS/OSPF/Static route | |
QoS | Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
Actions of ACL, CAR, re-marking, and scheduling | |
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR | |
Congestion avoidance mechanisms, including WRED and tail drop | |
Traffic shaping | |
Configuration and Maintenance | Console, Telnet, and SSH terminals |
Network management protocols, such as SNMPv1/v2c/v3 | |
File upload and download through FTP and TFTP | |
BootROM upgrade and remote upgrade | |
802.3az Energy Efficient Ethernet (EEE) | |
Hot patches | |
User operation logs | |
Zero-Touch Provisioning (ZTP) | |
Security and Management | 802.1x authentication |
Command line authority control based on user levels, preventing unauthorized users from using commands | |
DoS, ARP, and ICMP attack defenses | |
Port isolation, port security, and sticky MAC | |
Binding of the IP address, MAC address, interface number, and VLAN ID | |
Authentication methods, including AAA, RADIUS, and HWTACACS | |
Remote Network Monitoring (RMON) | |
Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm |
Weight (fully loaded) | 8.8 kg (19.4 lb) |
Environmental Parameters | Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) |
Storage temperature: -40°C to 70°C (-40°F to 158°F) | |
Relative humidity: 5% to 95%, non-condensing | |
Operating Voltage | AC: 90V to 264V |
DC: -38.4V to -72V | |
Maximum Power Consumption | 131W |