ASR-9006-DC

ASR-9006-DC Specifications

Cisco ASR 9006 Specs

Width: 17.38 in. (441.45 mm)

Depth:

· With doors: 29.05 in. (737.9 mm)

· Without doors: 29.05 in. (737.9 mm)

Weight:

· 89.55 lb (40.7 kg) (chassis with PEM)

150 lb (65.91 kg) (fully loaded, excluding line cards and power modules) – RSP, two v2 FAN trays, PEMs

2 fan trays

1 PEM (either DC or AC)

1 fan filter

Fan redundancy

Feed redundancy

Power-supply redundancy

RSP redundancy

Software redundancy

21- and 23-in. adapters available

Note: Minimum 17.75-in. opening between posts is needed for proper operation

Note: Doors not recommended in enclosed cabinets

Performance

· Active/active nonblocking operation mode in dual-RSP redundant configuration

· Fully redundant in dual-RSP redundant configuration

· Built-in service-intelligence and traffic-prioritization capability

· 6 high-efficiency fans per tray

· Variable-speed fans for optimal thermal performance

· No single point of failure

Power

Multiple power module types:

· 3 kW AC power module

· 2.1 kW DC power module

Note: Mixing of AC and DC modules is not supported

· DC: N+1 redundancy

· Power module redundancy

· A/B Feed redundancy

Fully load-sharing power infrastructure

Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum)

Operating temperature (nominal)

41 to 104ºF (5 to 40ºC)

Operating temperature (short-term)

ASR 9006: 23 to 131ºF (-5 to 55ºC)

ASR 9010: 23 to 122ºF (-5 to 50ºC)

Operating humidity (nominal) (relative humidity)

5 to 90%

Storage temperature

-40 to 158ºF (-40 to 70ºC)

Storage (relative humidity)

5 to 93%

Operating altitude

-60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)

Network Equipment Building Standards (NEBS)

Cisco ASR 9006 is designed to meet:

· SR-3580: NEBS Criteria Levels (Level 3)

· GR-1089-CORE: NEBS EMC and Safety

· GR-63-CORE: NEBS Physical Protection

· VZ.TPR.9205: Verizon TEEER

ETSI standards

Cisco ASR 9006 is designed to meet:

· EN300 386: Telecommunications Network Equipment (EMC)

· ETSI 300 019 Storage Class 1.1

· ETSI 300 019 Transportation Class 2.3

· ETSI 300 019 Stationary Use Class 3.1

EMC standards emission

Cisco ASR 9006 is designed to meet:

· FCC Class 47CFR15 A

· ICES 003 Class A

· AS/NZS CISRP22 Class A

· CISPR 22 (EN55022) Class A

· VCCI Class A

· BSMI Class A

· IEC/EN 61000-3-12: Power Line Harmonics

· IEC/EN 61000-3-11: Voltage Fluctuations and Flicker

· EN55022: Information Technology Equipment (Emissions)

· EN 50121-4: Railway EMC

EMC standards immunity

Cisco ASR 9006 is designed to meet:

· IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)

· IEC/EN-61000-4-3: Radiated Immunity (10V/m)

· IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)

· IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)

· IEC/EN-61000-4-5: Signal Surge Ports (1kV)

· IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)

· IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)

· IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)

· IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations

· EN55024: Information Technology Equipment (Immunity)

· EN50082-1/EN-61000-6-1: Generic Immunity Standard

· EN 50121-4: Railway EMC

Safety

Cisco ASR 9006 is designed to meet:

· UL/CSA/IEC/EN 60950-1

· IEC/EN 60825 Laser Safety

· ACA TS001

· AS/NZS 60950

· FDA Code of Federal Regulations Laser Safety