7600-SIP-400 (USED)
$35,000.00 Original price was: $35,000.00.$9,188.00Current price is: $9,188.00.
Model: | 7600-SIP-400 Catalyst 6500 Service Module |
Detail: | Cisco 7600 Series SPA Interface Processor-400 |
- Description
- Reviews (0)
Description
7600-SIP-400 Specification |
||||
Compatibility |
Cisco Route Switch Processor 720 3C/3CXL, Cisco Supervisor Engine 720-3B/3BXL, and Cisco Supervisor Engine 32 (Sup-32) systems |
|||
Minimum softwareCompatibility |
Cisco IOS® Software Release 12.2(18)SXE, or later releases for Supervisor Engine 720-3B/3BXL and Supervisor Engine 32 systems in native mode Cisco IOS Software; also, 12.2(33)SRB or later releases for RSP720-GE-3CXL and RSP720-GE-3C systems |
|||
Protocols |
● TCP ● User Datagram Protocol (UDP) ● IPv4 Unicast and Multicast ● IPv6 Unicast and Multicast ● Multiprotocol Label Switching (MPLS) ● SAToP and CESoPSN |
|||
Encapsulation |
● Frame Relay ● Point-to-Point Protocol (PPP) ● High-Level Data Link Control (HDLC) ● ATM permanent virtual circuit-constant bit rate (PVC-CBR), variable bit rate real-time (VBR-rt), VBR non-real-time (VBR-nrt), and unspecified bit rate (UBR) ● ATM switched virtual circuit (SVC)-CBR, VBR-rt, VBR-nrt, UBR, UBR+ ● TDM over MPLS, ATM over MPLS, and ATM over GRE ● L2TPv3 |
|||
Cards, ports, and slots |
Four SPA bays per Cisco 7600 SIP-400 |
|||
Features |
QoS, ACLs, and Low-Speed Aggregation Features QoS ● Modular QoS CLI (MQC) ● Classification based on: ◦ IP Precedence (IPv6 and IPv4) ◦ Diffserv code point (DSCP) (IPv6 and IPv4) ◦ MPLS experimental values (MPLS EXP) ◦ Extended ACL ◦ ATM CLP ◦ Frame Relay DE ◦ Class of Service (CoS) ◦ VLAN Congestion Avoidance ● Weighted Random Early Detection (WRED) based on IP Precedence, DSCP, MPLS EXP, ECN (mark IP TOS field for POS traffic) Queuing ● Congestion management ◦ Per-virtual circuit queuing ◦ Ingress and egress Low-Latency Queuing (LLQ) ◦ Egress Class-Based Weighted Fair Queuing (CBWFQ) Traffic Classification, Shaping, and Bandwidth Policing ● Marking ● Policing ● Distributed traffic shaping (DTS) ● Hierarchical service policies Security ● Standard and extended ACLs Layer 2 and Layer 3 VPNs ● Ethernet over MPLS (EoMPLS) ● ATM over MPLS (ATM over MPLS) ◦ ATM Adaptation Layer 5 (AAL5) virtual circuit mode, single and packed cell relay virtual circuit mode ● Frame Relay over MPLS (FRoMPLS) ● Layer 3 MPLS/VPN over GRE ● ATM over GRE, Ethernet over GRE ● TDM over MPLS High availability ● IPv4 Nonstop Forwarding (NSF) ● IPv4 Stateful Switchover (SSO) ● Automatic Protection Switching (APS) with ATM, POS SPAs ● OIR for both SIP and SPA Multilink support ● Frame Relay Multilink^1 (1) Added in >15.2(04)S |
|||
Memory |
1 GB default Double Data Rate (DDR) synchronous dynamic RAM (SDRAM) per Cisco 7600 SIP-400 |
|||
Supported SPAs |
Following SPAs are supported on SIP-400 release wise 7600-SIP-400 – POS SPAs Support |
|||
SPA ID |
Project/Family |
Height |
Min Release |
|
SPA-2XOC3-POS |
Sphinx |
Half |
12.2(18)SXE |
|
SPA-4XOC3-POS |
Sphinx |
Half |
12.2(18)SXE |
|
SPA-1XOC12-POS |
Sphinx |
Half |
12.2(18)SXE |
|
SPA-1XOC48-POS |
Iguana |
Half |
12.2(33)SRA |
|
SPA-4XOC3-POS-V2 |
Gladiator |
Half |
15.2(04)S |
|
SPA-8XOC3-POS |
Gladiator |
Half |
15.2(04)S |
|
SPA-2XOC12-POS |
Gladiator |
Half |
15.2(04)S |
|
SPA-4XOC12-POS |
Gladiator |
Half |
15.2(04)S |
|
7600-SIP-400 – ATM SPAs Support |
||||
SPA ID |
Project/Family |
Height |
Min Release |
|
SPA-2XOC3-ATM |
Warlord |
Full |
12.2(18)SXE |
|
SPA-4XOC3-ATM |
Warlord |
Full |
12.2(18)SXE |
|
SPA-1XOC12-ATM |
Warlord |
Full |
12.2(18)SXE |
|
SPA-1XOC48-ATM |
Ronin |
Full |
12.2(33)SRA |
|
SPA-3XOC3-ATM-V2 |
Barbarian |
Half |
15.0(01) |
|
SPA-1XOC3-ATM-V2 |
Barbarian |
Half |
15.0(01) |
|
SPA-1XOC12-ATM-V2 |
Barbarian |
Half |
15.0(01) |
|
7600-SIP-400 – GE SPAs Support |
||||
SPA ID |
Project/Family |
Height |
Min Release |
|
SPA-2X1GE |
Wanda |
Half |
12.2(18)SXF |
|
SPA-2X1GE-V2 |
Wanda |
Half |
12.2(18)SRB |
|
SPA-5X1GE-V2 |
Cricket |
Half |
12.2(33)SRB |
|
SPA-1X10GE-V2 |
Scorpion |
Half |
12.2(33)SRB |
|
SPA-2X1GE-SYNCE |
SyncE |
Half |
15.0(01) |
|
SPA-4X1FE-TX-V2 |
FastEthernet |
Half |
12.2(33)SRD |
|
SPA-8X1FE-TX-V2 |
FastEthernet |
Half |
12.2(33)SRD |
|
7600-SIP-400 – CEoP SPAs Support |
||||
SPA ID |
Project/Family |
Height |
Min Release |
|
SPA-24XT1E1-CE |
Velvet Hammer |
Half |
12.2(33)SRB |
|
SPA-1XOC3-CE |
Black Russian |
Half |
12.2(33)SRB |
|
SPA-2XT3E3-CE |
White Russian |
Half |
12.2(33)SRC(ATM only) |
|
7600-SIP-400 – Serial/Channelized SPAs |
||||
SPA ID |
Project/Family |
Height |
Min Release |
|
SPA-2XT3E3 |
Javelin |
Half |
12.2(33)SRC |
|
SPA-4XT3E3 |
Javelin |
Half |
12.2(33)SRC |
|
SPA-8XCHTE1 |
Maverick |
Half |
12.2(33)SRC |
|
SPA-CHOC3-STM1 |
Prowler |
Half |
12.2(33)SRC |
|
SPA-2XCT3 |
Patriot |
Half |
12.2(33)SRC |
|
SPA-4XCT3 |
Patriot |
Half |
12.2(33)SRC |
|
SPA-4XT-SERIAL |
DocOct |
Half |
15.2(03)S |
|
SPA-CHOC12-STM4 |
Chopper |
Half |
12.2(33)SRD |
|
SPA-1XCHOC48/DS3 |
Trex |
Full |
15.2(01)S |
|
SPA-2XT3/E3-V2 |
Javelin-V2 |
Half |
15.3(3)S |
|
SPA-4XT3/E3-V2 |
Javelin-V2 |
Half |
15.3(3)S |
|
SPA-8XCHT1/E1-V2 |
Maverick-V2 |
Half |
15.3(3)S |
|
SPA-1XCHSTM1/OC3-V2 |
Prowler-V2 |
Half |
15.3(3)S |
|
SPA-2XCT3/DS0-V2 |
Patriot-V2 |
Half |
15.3(3)S |
|
SPA-4XCT3/DS0-V2 |
Patriot-V2 |
Half |
15.3(3)S |
|
Environmentalconditions |
● Operating temperature: 32 to 104°F (0 to 40°C) ● Storage temperature: -40 to 167°F (-40 to 75°C) ● Relative humidity: 10 to 90 percent, noncondensing ● Operating altitude: -60 to 2000m |
|||
MIBs |
● Cisco Entity MIB (CISCO-ENTITY-MIB) ● Cisco Entity Asset MIB ● Cisco Entity Field-Replaceable Unit (FRU) Control MIB ● Cisco Entity Alarm MIB ● Interface IF MIB (RFC 2233) ● Frame Relay MIB (RFC 1315) ● Cisco Frame Relay MIB ● ATM MIB (RFC 1695) ● Definitions of Managed Objects for Bridges (RFC 1493) ● Evolution of Interfaces Group of MIB-II (RFC 1573) ● SNMP MIB II (RFC 1213) ● Remote Monitoring (RMON) MIB (RFC 1757) ● Switch Monitoring (SMON) MIB |
|||
Network management |
Supported with CiscoWorks CiscoView CiscoWorks Resource Manager Essentials (RME) Cisco IP Solution Center (ISC) |
|||
Physical specifications |
● Occupies one slot in a Cisco 7600 Series router ● Supports up to 12 Cisco 7600 SIP-400s in a 13-slot chassis ● Requires Supervisor Engine 720-3B or 720-3BXL ● Dimensions (H x W x D): 1.75 x 15.375 x 16 in. ● Weight: 16 lbs not including the packaging |
|||
Power |
185W power consumption per Cisco 7600 SIP-400 265W maximum power consumption with 4 SPAs |
|||
Indicators |
Cisco 7600 SIP-400 status: green (operational); orange (faulty) |
|||
Regulatory complianceSafety |
CE marking ● UL 60950 ● CSA C22.2 No. 60950 ● EN60950 ● TS001 ● IEC 60950 ● AS/NZS3260 ● UL60950 EMC ● FCC Part 15 Class A ● ICES-003 Class A ● VCCI Class A ● EN55022 Class A ● CISPR22 Class A ● AS/NZS3548 Class A ● EN61000-3-2 ● EN61000-3-3 ● EN61000-3-1 ● EN55024 ● EN50082-1 ● EN300 386 |
|||
Standards |
Telecommunications ● TU-T G.610 ● ITU-T G.703 ● ITU-T G.707 ● ITU-T G.783 Sections 9-10 ● ITU-T G.784 ● ITU-T G.803 ● ITU-T G.813 ● ITU-T G.825 ● ITU-T G.826 ● ITU-T G.841 ● ITU-T G.957 Table 3 ● ITU-T G.958 ● ITU-T I.361 ● ITU-T I.363 ● ITU I.432 ● ITU-T Q.2110 ● ITU-T Q.2130 ● ITU-T Q.2140 ● ITU-T Q.2931 ● ITU-T O.151 ● ITU-T O.171 ● ETSI ETS 300 417-1-1 ● ACA TS 026 (1997) ● BABT/TC/139 (Draft 1e) |
Reviews
There are no reviews yet.