AIR-AP1852E-B-K9C

Cisco

Cisco Unified Wireless Network Software Release with AireOS controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points

Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh

Cisco 2500, ISR G2 Module, WiSM2 for Catalyst 6500, Cisco 5500, Cisco Flex 7500, Cisco 8500, Cisco 5760, Catalyst 3650/3850 with integrated controller, Cisco Mobility Express

4×4 MIMO, four spatial streams; MRC; 20/40 MHz channels; PHY data rates up to 600 Mbps (40 MHz at 5 GHz); A-MPDU/A-MSDU aggregation; 802.11 DFS; CSD support

4×4 MIMO with four spatial streams (single-user), 4×4 MIMO with three spatial streams (multiuser), MRC, 802.11ac beamforming, 20/40/80 MHz channels, up to 1.7 Gbps PHY at 80 MHz (5 GHz), A-MPDU/A-MSDU, 802.11 DFS, CSD support, Rogue device detection

2.4 GHz: gain 3 dBi, internal omni, 360° horizontal beamwidth; 5 GHz: gain 5 dBi, internal omni, 360° horizontal beamwidth

Certified for antenna gains up to 6 dBi (2.4 GHz and 5 GHz); wide selection of Cisco antennas available (sold separately)

1 x 10/100/1000BASE-T (RJ-45, PoE), 1 x 10/100/1000BASE-T AUX (RJ-45, Link Aggregation), Management console port (RJ-45), USB 2.0 (future software support)

Status LED: boot loader status, association status, operating status, warnings, errors

8.3 x 8.3 x 2 in (210.8 x 210.8 x 50.8 mm) – without mounting bracket

Storage temp: -22° to 158°F (-30° to 70°C); Storage altitude: 25°C, 15,000 ft; Operating temp: -4° to 122°F (-20° to 50°C); Operating humidity: 10% to 90% (noncondensing); Operating altitude: 40°C, 9843 ft

1 GB DRAM, 256 MB Flash

AP1850: 44–57 VDC; Power supply/injector: 100–240 VAC, 50–60 Hz

20.9 W (power drawn from PoE source may be higher depending on cable length)

802.3at, Enhanced PoE, Cisco power injector (AIR-PWRINJ4=), Cisco local power supply (AIR-PWR-C=), Cisco power injector (AIR-PWRINJ5=, supports 802.3af only), 802.3af. Note: With 802.3af PoE, 1852e 2.4 GHz radio operates as 2×3, USB and AUX Ethernet are disabled.