LS-S3328TP-PWR-EI
$700.00
Model: | LS-S3328TP-PWR-EI Huawei S3300 Series Switch |
Detail: | S3328TP-PWR-EI Mainframe(24 10/100 BASE-T ports and 2 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports and 2 SFP GE(1000 BASE-X) ports,PoE,Chassis,Double Slots of power,Without Power) |
- Description
- Reviews (0)
Description
LS-S3328TP-PWR-EI Specification |
|
Fixed port |
24*10/100Base-T ports, 2* 100/1000Base-X and 2*1000Base-X ports |
Processor |
Dominant frequency: 300 MHz |
Switching capacity |
12.8 Gbit/s |
Forwarding performance |
9.6 Mpps |
DDR memory |
128 MB |
Flash Memory |
16 MB |
Backplane switching capacity |
64 Gbit/s |
MAC address table |
Supports 16K MAC address entries. |
Supports automatic learning and aging of MAC address. |
|
Supports static, dynamic, and blackhole MAC address entries. |
|
Supports packet filtering based on source MAC addresses. |
|
VLAN features |
Supports up to 4096 VLANs. |
Supports guest VLANs,voice VLANs, and super VLANs. |
|
Supports VLAN assignment based on MAC addresses, protocols, and IP subnets. |
|
Supports basic QinQ and selective QinQ. |
|
Supports 1:1 VLAN switching. |
|
Supports N:1 VLAN switching. |
|
QoS/ACL |
Supports rate limit on packets sent and recieved by a port. |
Supports packet redirection. |
|
Supports port-based traffic policing and two-rate three-color CAR. |
|
Supports multiple queue scheduling algorithms including WRR, DRR, SP, WRR+SP, and DRR+SP. |
|
Supports re-marking of the 802.1p priority and DSCP priority. |
|
Supports packet filtering based on Layer 2 to Layer 4 information, filtering out invalidframes based on the source MAC address, destination MACaddress,source IP address,destination IP address, port number, protocol, and VLAN ID. |
|
Supports queue-based rate limit and traffic shaping on ports. |
|
Supports eight queues on each port. |
|
IPv6 features |
Supports PMTU. |
Supports Neighbor Discovery (ND). |
|
Supports IPv6 Ping, IPv6 Tracert, and IPv6 Telnet. |
|
Supports manually configured tunnels. |
|
Supports 6-to-4 tunnels. |
|
Supports ISATAP tunnels. |
|
Supports ACLs based on the source IPv6 address, destination IPv6 address, Layer-4 port,or protocol type. |
|
Supports MLD v1/v2 snooping. |
|
Multicast |
Supports 1024 multicast groups. |
Supports IGMP v1/v2/v3 snooping and fast leave. |
|
Supports multicast VLAN and cross-VLAN multicastreplication. |
|
Supports multicast load sharing among bundled ports. |
|
Supports controllable multicast. |
|
Supports port-based multicast traffic statistics. |
|
Supports IGMP v1/v2/v3, PIM-SM, and PIM-DM. |
|
Security |
Supports hierarchical user management and password protection. |
Supports DoS attack defense, ARP attack defense, and ICMP attack defense. |
|
Supports binding of the IP address, MAC address, port number, and VLAN ID. |
|
Supports port isolation, port security, and sticky MAC. |
|
Supports blackhole MAC addresses. |
|
Supports limit on the number of MAC addresses to be learned. |
|
Supports IEEE 802.1X authentication and the limit on the maximum number of users on a port. |
|
Supports multiple authentication methods including AAA, RADIUS, HWTACACS+, and NAC. |
|
Supports SSH v2. |
|
Supports CPU protection. |
|
Supports blacklisting and whitelisting. |
|
Surge protection |
Each port has a surge protection capability of 6 KV. Each port has a surge protection capability of 15 KV after an extra surge protection device is added. |
Management and maintenance |
Supports iStack (except the S33HI). |
Supports MAC Forced Forwarding (MFF). |
|
Supports auto-config and HGMP. |
|
Supports remote configuration and maintenance by using Telnet. |
|
Supports Virtual Cable Test (VCT). |
|
Supports Ethernet OAM (IEEE 802.3ah and 802.1ag). |
|
Supports Dying gasp power-off alarm (the S3328TP-EI-MC and the S3326C-HI only). |
|
Supports local port mirroring, Remote Switched Port Analyzer (RSPAN), and packet forwarding on an observing port. |
|
Supports SNMP v1/v2/v3 and RMON. |
|
Supports MUX VLAN and GVRP. |
|
Supports the Network Management System (NMS) and Web management. |
|
Supports SSH v2. |
|
Supports HTTPS (the S3300HI only). |
|
Supports 802.3az EEE (the S3300HI only). |
|
Supports system logs and multi-level alarms. |
|
Operating environment |
Operating temperature: 0°C to 50°C (long term); –5°C to 55°C (short term); |
Power supply |
AC: |
Dimensions (W x D x H) |
442 mm x 220 mmx 43.6 mm |
Weight |
< 4.03 kg (excluding power modules) |
Power consumption |
< 875 W, PoE power = 740 W |
Reviews
There are no reviews yet.