DS-KB8112-IM
Model: | DS-KB8112-IM – Hikvision Video Intercom |
Detail: | IP Video Intercom Water Proof Vandal-Resistant Door Station |
- Description
- Reviews (0)
Description
DS-KB8112-IM Specification |
|
System Parameters |
|
Operation System |
Embedded Linux Operation System |
Processor |
High-Performance Embedded SOC Processor |
Camera Parameters |
|
Image Sensor |
1/3″ Progressive Scan CMOS, Color, Day/Night |
Light sensitivity |
Low Illumination |
Lens |
Pinhole, f3.47mm, F2.5 |
Field of view |
80° (Horizontal), 44° (Vertical) |
Field of view adjustment |
-50° to 50° |
Video Parameters |
|
Video streaming |
Dual Stream |
Video Compression Standard |
H.264 |
Resolution |
Main Stream: 1280 × 720 Sub-Stream: 640 x 480 |
Video frame rate |
PAL: 25 fps, NTSC: 30 fps |
Video bit rate |
Main Stream: 32 Kbps to 4096 Kbps Sub-Stream: 32 Kbps to 2048 Kbps |
Anti-flicker frequency |
50 Hz, 60 Hz |
Wide dynamic range |
Digital WDR, Auto-Switch, DAY/ON, NIGHT/OFF |
Image settings |
Color, Brightness, Contrast, Sharpness, Saturation, Video Standard, OSD Display |
Audio Parameters |
|
Audio Input |
Built-in Omnidirectional Microphone |
Audio Output |
Built-in Loudspeaker |
Audio streaming |
Two-Way, Full Duplex |
Audio Compression Standard |
G.711 U |
Audio Compression Rate |
64 Kbps |
Audio Quality |
Noise Suppression and Echo Cancellation |
Network Parameters |
|
Ethernet |
10/100 Mbps Self-Adaptive Ethernet |
Light Supplement |
|
Light Supplement Mode |
IR Supplement, IR Distance: 5 Meters |
Wavelength |
940 nm |
Control |
Auto ON/OFF, Time ON/OFF |
Alarm Parameters |
|
Alarm Input |
Door Magnetic Alarm |
Event actions |
|
Event |
Motion Detection, Picture Capturing, Call Button Pressing |
File uploading |
FTP |
Email notification |
Login Succeeded via Software or Web |
Device Interfaces |
|
I/O Output |
1 Relay Output |
I/O Input |
1 |
Network Interface |
1 RJ-45 10/100 Mbps Self-Adaptive Ethernet Interface |
General |
|
Power Supply |
PoE (Power over Ethernet) 12 VDC |
Power Consumption |
≤12 W |
Impact protection |
IK 9 |
Material |
Wall Mounting Shield: Zinc Alloy Front Panel: Zinc Alloy Rear Panel: Aluminum Alloy Wall Mounting Plate: Secc |
Working Humidity |
10% to 90% |
Working Temperature |
-30° C to +50° C (-22° F to 122° F) |
Dimensions(L × W × H) |
161.9 mm × 74.1 mm × 53.2 mm (6.37″ × 2.92″ × 2.09″) |
IP Protection Level |
IP66 |
Reviews
There are no reviews yet.