Cisco ASR 1000-X is designed for high-end enterprise, data center, service provider edging network in order to handle explosive traffic through the network. It supports only software redundancy, and it is based on a Quad-core 2.13GHz processor with 4GB memory, 8GB flash memory, 1 SPA bay, SPA interface processor 10 (SIP10).
This ASR1001-X is similar with the ASR1001-X=. The ASR1001-X= is a spare one.
Figure 1 shows the appearance of the Cisco ASR 1001-X.
Table 1 shows the Quick Specs.
|Product Code||Cisco ASR 1001-X|
|System Bandwidth||2.5G (default) / 5G, 10G, 20G (upgrade)|
|Router Processor (RP)||Quad-core 2.13Ghz processor|
|Build-in Gigabit Ethernet port||6 x SFP ports, 2 x SFP+ ports|
|Redundancy||Software (license purchase separately)|
|SIP and Ethernet line card||Integrated in chassis; not upgradable|
|Embedded hardware-based encryption||up to 8-Gbps crypto support throughput|
|DRAM Memory||4 GB|
|Flash Memory||8 GB|
|Shared port adapters||1 SPA slot|
|External USB flash memory||1-GB USB flash-memory support|
Figure 2 shows the front panel of Cisco ASR 1001-X.
① NIM slots
② CON—One mini eUSB por
③ STAT—Status LED
④ CRIT LED—Critical alarm indicator; MAJ LED—Major alarm indicator; MIN LED—Minor alarm indicator
⑤ 6 x SFP ports, 2 x SFP+ ports
⑥ CON—One RJ-45/RS-232 compatible console port
⑦ USB port 1
⑧ USB port 0
⑨ Shared port adapter slot
⑩ MGMT—One RJ-45 10/100/1000 management Ethernet port.
⑪ AUX—One RJ-45/RS-232 compatible auxiliary port
⑫ PWR—Power LED
·Six built-in 1 GE SFP-only interfaces (do not support SFP+), and two built-in 10 GE SFP+ interfaces (support only 10-GE rate)
Table 2 shows some LEDs’ Descriptions.
|PWR(Power)||Solid green||All power requirements are within specification.|
|Off||The router is in standby mode.|
|Solid green||Cisco IOSD and other required processes have loaded successfully and are operating.|
|Yellow||ROMMON is running (including a permanent failure of RP software) or the Process Manager has declared a critical RP process (including IOSD) dead. A user can log in to recover.|
|Red||Occurs during system failure or power-up.|
|CRIT(Critical)||Solid Red||Functions as a critical alarm indicator. The LED is lso a solid red during the boot process.|
|MAJ(Major)||Solid Red||Major alarm indicator.|
|MIN(Minor)||Amber||Minor alarm indicator.|
Figure 3 shows the back panel of ASR1001-X.
① Two power supplies, either two AC power supplies or two DC power supplies are accessed from the rear of the router and are hot-swappable.
② Four internal fans draw cooling air into the chassis and across internal components to maintain an acceptable operating temperature.
The ASR1001-X should be configured with some modules and accessories for normal operation.
Table 3 shows the recommended configuration.
|ASR1001-X-PWR-AC||2||Cisco ASR1001-X AC Power Supply|
|CAB-L620P-C13-US||2||Power Cord, 250VAC, 15A, NEMA L6-20 to C13, US|
|SASR1K1XU-313S||1||Cisco ASR1001-X IOS XE UNIVERSAL – NO ENCRYPTION|
|NIM-BLANK||1||Blank faceplate for NIM slot on Cisco ISR 4400|
|SPA-BLANK||1||Blank Cover for regular SPA|
|M-ASR1001X-8GB||1||Cisco ASR1001-X 8GB DRAM|
|ASR1K-OTHER||1||ASE1K-other applications for Enterprise or SP-Tracking only|
|L-SLASR1-IPB=||1||Cisco ASR1001 License L-SLASR1-IPB= Cisco ASR 1000 IP BASE E-Delivery PAK|