Product Details
FAP-421E
$480.00
| Model: | FAP-421E – Fortinet FortiAP Access Points |
| Detail: | Indoor Wireless AP — 2x GE RJ45 ports, 802.11 a/b/g/n/ac Wave 2, dual radio (2.4 GHz/5 GHz), 4×4 MU-MIMO, ceiling/wall mount kit included, power adapter not included. For Gigabit PoE injector order: GPI-130. |
Description
FAP-421E Specification |
|
|
Hardware |
|
|
Hardware Type |
Indoor AP |
|
Number of Radios |
2 |
|
Number of Antennas |
8 Internal |
|
Antenna Type and Peak Gain |
PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
|
Frequency Bands (GHz)* |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
|
Radio 1 Capabilities |
2.4 GHz b/g/n (4×4:4 stream) 20/40 MHz (256 QAM) |
|
Radio 2 Capabilities |
5 GHz a/n/ac (4×4:4 stream) 20/40/80 MHz (256 QAM) |
|
Maximum Data Rate |
Radio 1: up to 800 Mbps Radio 2: up to 1,733 Mbps |
|
Bluetooth Low Energy (BT/BLE) Radio |
|
|
Interfaces |
2x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port |
|
Power over Ethernet (PoE) |
Dual redundant PoE power ports with support for IEEE 802.3at (2×2 operation with 802.3af) |
|
Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled) |
|
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
|
User/Device Authentication |
WPA™ and WPA2™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
|
Maximum Tx Power |
2.4 GHz: 24 dBm / 251 mW (4 chains combined)* 5 GHz: 25 dBm / 316 mW (4 chains combined)* |
|
Kensington Lock |
Yes |
|
IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az |
|
SSID Types Supported |
Local-Bridge, Tunnel, Mesh |
|
Per Radio Client Capacity |
Up to 512 |
|
Cellular Co-existence |
No |
|
LED Off Mode |
Yes |
|
Advanced 802.11 Features |
|
|
802.11ac MU-MIMO Wave 2 |
Yes |
|
Transmit Beam Forming (TxBF) |
Yes |
|
Low-Density Parity Check (LDPC) Encoding |
Yes |
|
Maximum Likelihood Demodulation (MLD) |
Yes |
|
Maximum Ratio Combining (MRC) |
Yes |
|
A-MPDU and A-MSDU Packet Aggregation |
Yes |
|
MIMO Power Save |
Yes |
|
Short Guard Interval |
Yes |
|
Wireless Monitoring Capabilities |
|
|
Rogue Scan Radio Modes |
Background, Full-time |
|
WIPS / WIDS Radio Modes |
Background, Full-time |
|
Packet Sniffer Mode |
Yes |
|
Spectrum Analyzer |
Yes |
|
Dimensions |
|
|
Length x Width x Height |
8.5 x 8.5 x 2.2 inches (215 x 215 x 56 mm) |
|
Mounting Options |
Ceiling, T-Rail, and Wall |
|
Included Accessories |
Mount kits for Ceiling, T-Rail, and Wall |
|
Environment |
|
|
Power Supply |
SP-FAP400-PA-XX, GPI-115, or GPI-130 |
|
Power Consumption (Max.) |
23 W max power draw in 802.3at mode and 12.95 W max power draw when in 802.3af power mode (operates in 2×2 mode) |
|
Humidity |
5–90% non-condensing |
|
Operating / Storage Temperature |
-4–122°F (-20–50°C) / -40–158°F (-40–70°C) |
|
Directives |
Low Voltage Directive • RoHS |
|
UL2043 Plenum Material |
Yes |
|
Mean Time Between Failures |
>30 Years |
|
IP Rating |
|
|
Surge Protection Built In |
|
|
Hit-less PoE Failover |
Yes |
|
Certifications |
|
|
Wi-Fi Alliance Certified |
Yes |
|
DFS |
FCC, IC, CE, Japan, Taiwan, Korea |
|
Warranty |
|
|
Limited Lifetime Warranty |
Yes |
|
*Frequency selection and power may be restricted to abide by regional regulatory compliance laws. |
|
